BE5BFE66-75A6-4AFF-BA2A-8CFE70B2B4D8.jpeg

For sale Ibanez Roadstar Velve Tune BII Tuners

Closed
$65.00
Status
This ad has been closed.

Details

I have three great condition Velve Tune BII tuners a Roadstar II RB-950.

Two bass side, one treble.

Price is for each, but make an offer if you want all three.

Alternatively, if you have a busted Velve Tune BII that you don't need, I am looking for a string post. Don't care about the housing, wings, gear, whatever.
  • BE5BFE66-75A6-4AFF-BA2A-8CFE70B2B4D8.jpeg
    BE5BFE66-75A6-4AFF-BA2A-8CFE70B2B4D8.jpeg
    562.8 KB · Views: 382
  • 60CED625-C2EA-46F6-9709-542F2E196B08.jpeg
    60CED625-C2EA-46F6-9709-542F2E196B08.jpeg
    728.9 KB · Views: 192
  • 3DA1A784-33E2-49E9-8886-0AF94E6771B1.jpeg
    3DA1A784-33E2-49E9-8886-0AF94E6771B1.jpeg
    875.3 KB · Views: 466
  • 1D37FA8A-864D-4FC1-9B94-FDFDC7777787.jpeg
    1D37FA8A-864D-4FC1-9B94-FDFDC7777787.jpeg
    652.3 KB · Views: 226

Comments

Nov 22, 2015
40
24
52
Reversible as in you can put a treble side on the bass side? Not really. You can swap out posts and gears, and I guess put up with a reversing turning peg (a throwback to 62 Fenders) but the housing isn't reversible.

You need a whole tuner, or just a part? I only have a couple parts left.
 
Jan 28, 2009
7,734
14,591
california
yes i meant disassemble the tuner, turn the post and gears around. can the gear be reinstalled upside down so that it would then rotate the correct way or is it not the same top and bottom?
 
Nov 22, 2015
40
24
52
yes i meant disassemble the tuner, turn the post and gears around. can the gear be reinstalled upside down so that it would then rotate the correct way or is it not the same top and bottom?

The gear bolted to the bottom of the post is a straight spur cog, no left or right bias. That cog can be swapped to either side. The tuning knob shaft has a worm/helical screw on it that drives the post spur cog. That worm gear is specifically left or right.

(If you turn a helical gear over, it still gears the same way. Same as it doesn't matter what side of a nut you spin on a bolt. So if the post cog was a helical gear, it would be specifically left or right.)

So you can swap the posts, cogs, but not knobs or housing. Unless in a pinch you don't care about having to turn one tuner backwards. Early fender basses had reverse tuners. Pre-64, I believe.
 

Classified ad information

Posted by
travisbrown
Feedback score
+0 /0 /-0
Category
For Sale: Parts, Strings, and Accessories
Views
3,892