IMG_20201004_221144.jpg

For trade Flame Koa Roscoe SKB Custom 3005, with audio clips

Closed
Strings
5
Status
This ad has been closed.

Details

This bass has an absolutely HUGE and surprisingly articulate sound, with lots of tonal versatility. I really don’t know anything about recording and may have had the gain too low, but I gave it a shot and tried to demonstrate some different tones this bass can produce. The tone knobs all go way past the adjustments I made on the recording, so you can sculpt the tone more to your liking, for sure. Feel free to ask me about the tone settings I used at different points, or anything else you may want to know.



Even after playing this bass for a while at home, I found I appreciated this particular instrument much more than I anticipated when playing nice and loud with a band. It just has more clarity and definition in the mix than I expected, so it’s character really shines through when it counts most. No matter the context, I am personally most impressed with the whollop the neck pickup produces on this beast.

-2010 Roscoe SKB Custom 3005 with audio demo
-Exhibition Flame Koa top and back.
-Body: Spanish cedar, wenge, and maple.
-Neck: maple with wenge center.
-Fretboard: wenge.
-Custom Koa, Wenge & maple control knobs (added on later, not made by Roscoe).
-Bartolini pickups and electronics.
-35" scale.
-18.3 mm string spacing.
-Nut width is 45mm.
-Comes with hard case and original paperwork.

This isn’t your average Roscoe (and even the average ones are great). With all the upgrades it’d cost $6,000, plus the wait time if you ordered this today.

Weight: 8.6 pounds according to my scale. It is my lightest bass, which is amazing given the longer scale and all that wonderful wenge, which usually make for an instrument that is too heavy for me. I bought this bass because I LOVE the tone of wenge but didn’t want the weight that comes with it. This is really a rare bass and it absolutely delivered what I thought was impossible (and have never seen before or since). Plus, it’s so beautiful! I’d keep it, but have realized I’m really just a 33-34” scale guy, so am letting this one go. I'll honestly miss it.

I took too many photos, but it's a really photogenic bass. Couldn't help it. One shows me pointing to what I was told was a mid-range gain adjustment pot that is available to adjust with a small flatblade screwdriver through a little hole in the back electronics cover. After trying it, I think it might be gain in general? Either way, just another of many tone adjustment possibilities this bass has, in addition to the push/pull two-frequency mid-range knob on the front, which allows you to cut or boost a higher or lower mid-range frequency, and the more common treble, bass, and pickup blending options.

I'm pretty new to talk bass and only have a couple positive reviews here, but have lots of positive reviews on eBay, and a few positive reviews on Reverb. Private message me if you want links to my accounts on those other websites, or if you want any other info. Thanks for looking.

Trades: My imaginary dream bass has unusually low action, five strings, a 33”-34” scale, wenge fingerboard if fretted, ebony if fretless, mahogany body, and is surprisingly lightweight. Maybe a single cut? Having never seen this, and being unwilling to pay what it'd cost to commission it to be built, I'm happy to entertain offers of things that actually exist instead. Maybe something with one or two of those features? Maybe something totally different.
  • IMG_20201004_221144.jpg
    IMG_20201004_221144.jpg
    957.5 KB · Views: 602
  • IMG_20201004_220458.jpg
    IMG_20201004_220458.jpg
    507.1 KB · Views: 580
  • IMG_20201004_220551.jpg
    IMG_20201004_220551.jpg
    825.1 KB · Views: 587
  • IMG_20201004_220623.jpg
    IMG_20201004_220623.jpg
    765.1 KB · Views: 586
  • IMG_20201004_220739.jpg
    IMG_20201004_220739.jpg
    473.5 KB · Views: 565
  • IMG_20201004_220805.jpg
    IMG_20201004_220805.jpg
    623.6 KB · Views: 575
  • IMG_20201004_220847.jpg
    IMG_20201004_220847.jpg
    689.9 KB · Views: 573
  • IMG_20201004_220919.jpg
    IMG_20201004_220919.jpg
    946.9 KB · Views: 591
  • IMG_20201004_220957.jpg
    IMG_20201004_220957.jpg
    486.2 KB · Views: 567
  • IMG_20201004_221046.jpg
    IMG_20201004_221046.jpg
    993.3 KB · Views: 574
  • IMG_20201004_221118.jpg
    IMG_20201004_221118.jpg
    590.6 KB · Views: 583
  • IMG_20201004_221204.jpg
    IMG_20201004_221204.jpg
    718.1 KB · Views: 593

Comments

Growling Woods

Supporting Member
Sep 4, 2020
180
542
Portland, OR
Here are more photos, including what the case looks like and all cosmetic flaws I am aware of on the bass. The neck, front and back of the bass are flawless, so far as I can tell, but there are three areas that have been dinged up a bit: the two horns and more subtly around the input jack.
 

Attachments

  • PXL_20201029_201239351.jpg
    PXL_20201029_201239351.jpg
    474.3 KB · Views: 508
  • PXL_20201029_201303234.jpg
    PXL_20201029_201303234.jpg
    378.2 KB · Views: 504
  • PXL_20201029_201318885.jpg
    PXL_20201029_201318885.jpg
    459.7 KB · Views: 508
  • PXL_20201029_201333595.jpg
    PXL_20201029_201333595.jpg
    962.2 KB · Views: 513
  • PXL_20201029_201357664.jpg
    PXL_20201029_201357664.jpg
    978.2 KB · Views: 517
  • PXL_20201029_204814036.jpg
    PXL_20201029_204814036.jpg
    1 MB · Views: 508
  • PXL_20201029_204832177.jpg
    PXL_20201029_204832177.jpg
    1.1 MB · Views: 508
  • PXL_20201029_204905790.jpg
    PXL_20201029_204905790.jpg
    957 KB · Views: 517

MMiller28

Supporting Member
Apr 27, 2003
2,694
5,674
Wisconsin
Wow! Too bad I'm not in the market. Looks like an incredible bass for $3200.
 

Dave Buda

Berklee Bass Department
Dec 22, 2007
29
4
Disclosures
Boston bass and berklee professor
..

You did the best sound clip demo I've heard. I really heard the bass, and you have a nice touch,,
I have a 34' Roscoe, LG 5 string that I purchased from Reverb, I have all the paper work.. I had a Roscoe that was stolen over the summer,, When I bought this bass i didn't even notice the listing said 34',, It's a wonderful bass.... This Bass, is about as punchy, articulate then any bass I've ever laid my hands on.,,, I would consider trading. Please be aware that I'm feeling the water on this.
Thank you,
David Buda,





This bass has an absolutely HUGE and surprisingly articulate sound, with lots of tonal versatility. I really don’t know anything about recording and may have had the gain too low, but I gave it a shot and tried to demonstrate some different tones this bass can produce. The tone knobs all go way past the adjustments I made on the recording, so you can sculpt the tone more to your liking, for sure. Feel free to ask me about the tone settings I used at different points, or anything else you may want to know.



Even after playing this bass for a while at home, I found I appreciated this particular instrument much more than I anticipated when playing nice and loud with a band. It just has more clarity and definition in the mix than I expected, so it’s character really shines through when it counts most. No matter the context, I am personally most impressed with the whollop the neck pickup produces on this beast.

-2010 Roscoe SKB Custom 3005 with audio demo
-Exhibition Flame Koa top and back.
-Body: Spanish cedar, wenge, and maple.
-Neck: maple with wenge center.
-Fretboard: wenge.
-Custom Koa, Wenge & maple control knobs (added on later, not made by Roscoe).
-Bartolini pickups and electronics.
-35" scale.
-18.3 mm string spacing.
-Nut width is 45mm.
-Comes with hard case and original paperwork.

This isn’t your average Roscoe (and even the average ones are great). With all the upgrades it’d cost $6,000, plus the wait time if you ordered this today.

Weight: 8.6 pounds according to my scale. It is my lightest bass, which is amazing given the longer scale and all that wonderful wenge, which usually make for an instrument that is too heavy for me. I bought this bass because I LOVE the tone of wenge but didn’t want the weight that comes with it. This is really a rare bass and it absolutely delivered what I thought was impossible (and have never seen before or since). Plus, it’s so beautiful! I’d keep it, but have realized I’m really just a 33-34” scale guy, so am letting this one go. I'll honestly miss it.





This bass has an absolutely HUGE and surprisingly articulate sound, with lots of tonal versatility. I really don’t know anything about recording and may have had the gain too low, but I gave it a shot and tried to demonstrate some different tones this bass can produce. The tone knobs all go way past the adjustments I made on the recording, so you can sculpt the tone more to your liking, for sure. Feel free to ask me about the tone settings I used at different points, or anything else you may want to know.



Even after playing this bass for a while at home, I found I appreciated this particular instrument much more than I anticipated when playing nice and loud with a band. It just has more clarity and definition in the mix than I expected, so it’s character really shines through when it counts most. No matter the context, I am personally most impressed with the whollop the neck pickup produces on this beast.

-2010 Roscoe SKB Custom 3005 with audio demo
-Exhibition Flame Koa top and back.
-Body: Spanish cedar, wenge, and maple.
-Neck: maple with wenge center.
-Fretboard: wenge.
-Custom Koa, Wenge & maple control knobs (added on later, not made by Roscoe).
-Bartolini pickups and electronics.
-35" scale.
-18.3 mm string spacing.
-Nut width is 45mm.
-Comes with hard case and original paperwork.

This isn’t your average Roscoe (and even the average ones are great). With all the upgrades it’d cost $6,000, plus the wait time if you ordered this today.

Weight: 8.6 pounds according to my scale. It is my lightest bass, which is amazing given the longer scale and all that wonderful wenge, which usually make for an instrument that is too heavy for me. I bought this bass because I LOVE the tone of wenge but didn’t want the weight that comes with it. This is really a rare bass and it absolutely delivered what I thought was impossible (and have never seen before or since). Plus, it’s so beautiful! I’d keep it, but have realized I’m really just a 33-34” scale guy, so am letting this one go. I'll honestly miss it.

I took too many photos, but it's a really photogenic bass. Couldn't help it. One shows me pointing to what I was told was a mid-range gain adjustment pot that is available to adjust with a small flatblade screwdriver through a little hole in the back electronics cover. After trying it, I think it might be gain in general? Either way, just another of many tone adjustment possibilities this bass has, in addition to the push/pull two-frequency mid-range knob on the front, which allows you to cut or boost a higher or lower mid-range frequency, and the more common treble, bass, and pickup blending options.

I'm pretty new to talk bass and only have a couple positive reviews here, but have lots of positive reviews on eBay, and a few positive reviews on Reverb. Private message me if you want links to my accounts on those other websites, or if you want any other info. Thanks for looking.

Trades: My imaginary dream bass has unusually low action, five strings, a 33”-34” scale, wenge fingerboard if fretted, ebony if fretless, mahogany body, and is surprisingly lightweight. Maybe a single cut? Having never seen this, and being unwilling to pay what it'd cost to commission it to be built, I'm happy to entertain offers of things that actually exist instead. Maybe something with one or two of those features? Maybe something totally different.







I took too many photos, but it's a really photogenic bass. Couldn't help it. One shows me pointing to what I was told was a mid-range gain adjustment pot that is available to adjust with a small flatblade screwdriver through a little hole in the back electronics cover. After trying it, I think it might be gain in general? Either way, just another of many tone adjustment possibilities this bass has, in addition to the push/pull two-frequency mid-range knob on the front, which allows you to cut or boost a higher or lower mid-range frequency, and the more common treble, bass, and pickup blending options.

I'm pretty new to talk bass and only have a couple positive reviews here, but have lots of positive reviews on eBay, and a few positive reviews on Reverb. Private message me if you want links to my accounts on those other websites, or if you want any other info. Thanks for looking.

Trades: My imaginary dream bass has unusually low action, five strings, a 33”-34” scale, wenge fingerboard if fretted, ebony if fretless, mahogany body, and is surprisingly lightweight. Maybe a single cut? Having never seen this, and being unwilling to pay what it'd cost to commission it to be built, I'm happy to entertain offers of things that actually exist instead. Maybe something with one or two of those features? Maybe something totally different.
 

Dave Buda

Berklee Bass Department
Dec 22, 2007
29
4
Disclosures
Boston bass and berklee professor
Crap I just saw you Traded..,
 

Growling Woods

Supporting Member
Sep 4, 2020
180
542
Portland, OR
..

You did the best sound clip demo I've heard. I really heard the bass, and you have a nice touch,,
I have a 34' Roscoe, LG 5 string that I purchased from Reverb, I have all the paper work.. I had a Roscoe that was stolen over the summer,, When I bought this bass i didn't even notice the listing said 34',, It's a wonderful bass.... This Bass, is about as punchy, articulate then any bass I've ever laid my hands on.,,, I would consider trading. Please be aware that I'm feeling the water on this.
Thank you,
David Buda,
 

Classified ad information

Posted by
Growling Woods
Feedback score
+23 /0 /-0
Category
For Sale: Bass Guitars
Views
2,621