• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

fEARful™ Part Twelve (12)

Status
Not open for further replies.
#4
My 15/6 cut kit, drivers, etc. were shipped by Leland (Featuring Eminence Speakers, Crown Amplifiers, DIY Speaker Kits - Speaker Hardware, over 30 years Audio experience) yesterday! In a week or so I should have my very own cab of awesomeness! I had a 3-space rack (aka, airhead) incorporated onto mine, so I'll add my Ampeg SVP-PRO and my Crown XLS1500 and have the second-most-ultimate COMBO OF DOOM! Ultimate would be, of course, a 1515/66, but space & weight considerations prevailed. Besides, any gig I will ever play where a 15/6 with 1,000+ watts would be inadequate will obviously have PA support.
 
#7
Invalid Link Removed

A quick picture for motivation purposes.

Most recent show: Outdoor festival stage, running both 15/6+15/sub with Peavey IPR-3000 bridged for the full 3Kw of power. Clean and clear with big lows at extremely loud volume. At one point both the monitor and FOH engineers came up with flashlights in hand to check out the speakers and boxes...They'd never seen such a rig.

They ran 2 lines from my setup. They took a DI from my Kern, and also mic'ed the 15/6 right near the 6" speaker. The FOH sound man, when I told him it was a 2-way setup jumped at the chance to get the lows from the DI and mid/high definition from the speaker.
 
#8
Yeah, even after the price increase on the Neos, A fEARful is still only a little more expensive than an Acme Low-B cab, which would be my second choice. I really want a transparent cab, and the fEARful is pretty affordable actually in that regard.

Plus, if I buy it in pieces, it'll be easier on the wallet.

Also, I get the experience of putting together a bass cab, which sounds like a good learning experience (and a lot of fun!)
 
#9
The price of the drivers had doubled but they have come down a bit.

A quick search I found 3015lf $205 shipped

EMINENCE KAPPALITE 3015LF 15" Neodymium Subwoofer 900W - eBay (item 190551779259 end time Aug-03-11 08:31:50 PDT)

3012lf for $270 shipped speaker hardware is out of stock but they usually have them for 250 + shipping

Amazon.com: Eminence Kappalite 3012LF Neo 12 Driver: Electronics

And 6nd/nm410 hasn't really changed at around $140. There was a company selling pair for this price but I believe they are all sold out.
 
As an eBay Associate, TalkBass may earn a commission from qualifying purchases.
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.
#15
Hey fEarful'ites [DEL]I'm looking for an Alpha 6 or AlphaLite 6 in 8 ohms - pretty quickly. If anyone has one to unload, lemme know otherwise I call Parts Express, etc [/DEL]...

Snagged one from Leland

Thanks!
 
#18
Sub'd

Still trying to convince myself to build a 15/6 first instead of a 12/6. I've got small and light covered with my shuttle 6 12t combo + ext cab. If I need more than the 15/6, I could build the 12/6 cube ( or 15 sub) later.

Money in hand... Still can't decide. I have a sneaking suspicion a pair of 12/6's would be all I'd ever need (and everything my genz 12t's aren't). But I do have my marriage to consider. So it may just have to be one for now.
 
#19
I finally got the time (and the courage) to put the crossover together, and it was easier than I thought it would be! Now I just need to wire everything up and seal the cabinet.

Here's the crossover (6ND410 above, 3012LF below):
100_1051.jpg
:hyper::hyper:
 
Status
Not open for further replies.

Latest posts

Top Bottom
Back