OK, so the ball is rolling on my next Hanewinckel bass. The current specs are:
- 6-string Signature set-neck fretted
- Draken body style
- mahogany body w/ striped padauk top
- maple neck w/ ebony fingerboard
- custom Bartolini wide-aperture pickups
Attached is a pic of the top wood (with a different body style drawn on it).
The pickups are essentially MV (5-string MM) shells w/ a pair of CJBD pickups thrown into each. Each pickup will have a 3-way on/on/on switch, selecting either coil or both. Each coil is actually two, self-humcancelling. So with a blend pot too, there will be lots of options.
It could be a bit of a wait for the pickups - oh well, this is something I've wanted for a while already.
I'm still undecided if I want some sort of face dots on the fingerboard - at least a 12th-fret inlay would be good, but I don't know what yet.

- 6-string Signature set-neck fretted
- Draken body style
- mahogany body w/ striped padauk top
- maple neck w/ ebony fingerboard
- custom Bartolini wide-aperture pickups
Attached is a pic of the top wood (with a different body style drawn on it).
The pickups are essentially MV (5-string MM) shells w/ a pair of CJBD pickups thrown into each. Each pickup will have a 3-way on/on/on switch, selecting either coil or both. Each coil is actually two, self-humcancelling. So with a blend pot too, there will be lots of options.
It could be a bit of a wait for the pickups - oh well, this is something I've wanted for a while already.
I'm still undecided if I want some sort of face dots on the fingerboard - at least a 12th-fret inlay would be good, but I don't know what yet.
