• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

MXR Bass D.I. Distortion SOUNDCLIPS

assboglin

Inactive
Jul 13, 2007
776
14
I always go around telling people I prefer the MXR Bass D.I.+ to the Sansamp, so I decided to post some samples to show some of the things I use the MXR's distortion channel for. These samples are at about a medium gain on the spectrum of what the MXR's distortion channel can do, to give you an idea. It's a pretty basic functional bass distortion. With the clean blend, it can go from overdrive to creamy, searing distortion, but it doesn't quite have the right vibe for what I'm going for. Maybe you'll like it.

Link Removed

Some riffings:

Link Removed

Redundant but what the hell:

Link Removed

With the Dunlop 105Q:

Link Removed

And with a Boss OC-2:

Link Removed
 
Very Nice samples! Thanks for posting them. I have wanted ther MXR DI for years but have never actually tried one out.

Blending the distortion with clean signal is clearly the way to go.
 
I'm glad you like the clips. In case anyone is interested, I have the clean blend at about half, and the gain is less than half with the noise gate off. I was playing one of my Jazz basses all knobs on full into my Ampeg tube head (set clean) with a miked (just an SM57) 2x12 cab.
 
The wah is before the D.I. I'm using a pedaltrain Jr. and it had 105Q -> Boss TU-2 -> MXR M-80 -> Boss DD-3 -> Ampeg. I might have also ran a compressor on there to help keep my crappy recording device from clipping. I also like to run a Boss OC-2 in front of the MXR. Maybe I'll do a sample of that later for you.
 
It is the biggest sounding bass wah I've found. I actually turn the Q down quite a bit, and I'm still not hitting it all the way to the toe down position. It's on the funkier, wetter side of wah land, but it also gets that fat lower frequency sweep that I sometimes like for more rock-like tones. Just out of curiousity what are you planning on running for distortion? I've owned countless distortion effects so I might have run the 105Q with it before.
 
Nice samples! I especially like #2 aswell as the riff :hyper:

I was never keen on my MXR DI distortion channel, but after a while i learn to love it! (Basically i started to like it when i learnt how to work it :hmm: )
My main setting is;
Blend - 11
Gain - 3
Trigger - 2
It can give some tube-esque(ish) sounds with a SS.

Definatly a keeper IMO and a must on my pedal board.
 
Nice samples! I especially like #2 aswell as the riff :hyper:
QUOTE]

i was thinkin the same thing, that riff is really cool man you should expand on it. And based off these samples im intrested in getting one, if not a blender. Ive been intrested in the xotic for a while now though. Also, those clips are pretty good recording grade for miking the cab. What kinda stuff are you using to record , ie computer software, ram all that shenanigans
 
I really like the EQ's on the Xotic effects, the bass control can get bumping bass without being as muddy or unnatural as other EQ's I've used. The X Blender gives you a lot of control over the effected signal, which is really handy.

The riff from #2 is just a part of a song I've pieced together. I'm heavily influenced by Curtis Mayfield and Jimi Hendrix, though I don't claim to be able to do anything like they did with their instruments.

All I've got for recording is this crappy outboard (connected via USB) soundcard that clips like mad when I use distortion, so I have to mic the cab because that's the only wah it'll handle it. The soundcard came with some Cakewalk software so that's what I record on, but I don't do anything to the sound with it apart from boosting the levels. What sound quality I have I accrue to my Ampeg. It sounds killer in person and luckily some of that can get translated through the mic.