Recent content by Basshead88

Is it safe to leave my amp on and just turn the powerbar it’s plugged into on and off. I have a orange crush 50 combo amp just curious if this will damage it or is this fine.

Not sure if this is the right place to post this but I’m building a little pedal to work as a A/B with volume controls. I just wanted to ask if the diagram I have drawn up would work or if anyone has inexpensive recommendations lol. basicly will this work? The 10 ohm resistors are to break...

So this is my current bass pedal board, the chain goes 1. Earnie ball Wah 2. Mxr 10 band eq 3. Boss limiter LM-2B 4. Nano POG 5. Boss chorus CE-5 6. EHX cockfight 7. EQD dispatch master 8. MXR bass d.I.+ How would you guys have the effects chain go? the POG and d.i.+ are new to me and the...

Would you guys recommend using a primer before spray painting it, I used Bondo and sanded the paint I’m not to concerned about the finish I’m using rustoleum paint and primer

thanks I’m looking to do a solid purple colour, I have a compressor and I do own a spray gun but I have 0 to little experience using it, I’m a carpenter/contractor I have a ton of experience staining wood but with the dents in the guitar I’d either have to do a sunburst or solid paint. I was...

Hi basstalk, I have a bass I’m refinishing I picked it up for next to nothing so I don’t want to spend a ton, the bass has quite a few large chips that need to be filled first. Wondering what paint I should use and how to fill the chips? do I need to remove the red paint?

I have a few guitars that are wall art for me, I started with guitar and transitioned to bass (after briefly playing the drums for years). I just like them, ones a 60’s Archtop acoustic that’s to hard to play and not worth fixing but it looks sweet. I also have my first guitar I don’t play...

I should of done that to test the pick up. it came with two strings on it

So my problem is I enjoy fixing and building bass guitars almost as much as I enjoy playing them. Any time I see a cheap bass that’s broken I want to fix it and now I have a few bass . My newest one is a guvnor bass no more information then that. So first I was going to restore it but upon...

Washburn T-24 Washburn T-14 made fretless with EMG’s Squier P bass 20th anniversary 2002 Squier P bass 2022 Ibanez 5 string acoustic Unknown Aria Jazz bass Rocker RB-100 heavily modded when I first started playing I wanted something other then a fender so I was really into Washburns but then...

I haven’t had it long enough I just got the MXR ten band, EHX cock fight and dispatch master when I built the board. The MXR takes 18v power supply and I’m running 9v into the adapter so the light stays on; but when it’s on it’s great. the wah takes away some low end and I use it to replace...

So I’ve final got around to building a pedal board after years of wanting too, here are some pics Right now it’s wired from tuner - LM 2B - MXR ten band - Ernie Ball Wah - EHX cock fight - Joyo Chorus - Dispatch Master

I purchased it like this, it had strings on it so I could only see the crack in the headstock, once I removed the strings the fretboard lifted ‍♂️

I have a bass with a crack in the headstock but it’s splitting in a few places, upon removing the hardware I also noticed the fretboard is starting to lift, how would I repair this? I’m thinking of just using glue and an air compressor to blow the glue in as deep as I can then clamping it. Any...