Recent content by Bivwack

#notanelectrician I decided to see if I could figure out how to repair my Carvin BX1500 head. Channel #1 is giving my a lot of static and cuttin in and out, and channel #2 has no output at all. I noticed some white powder spilling out from under one of the heat sinks. I decided to pop them...

I just pop mine in a small back pack for gigs. The other big advantage of an M13 is that Line 6 periodically provides free firmware updates. They haven't had one in a while, but the last one added 20+ new effects, and it was free!

I love my M13. In fact it's the only pedal I use when playing live right now. The only issue I have is that most of the overdrive/distortion models seem to cut the low end. I'm going to get a 'Blender' pedal to add some dry signal to compensate. (see my recent post...

Awesome! Now I know where to start. Thanks!!

Hey there folks. I'm a little stumped. I'm using a Line 6 M13 for all of my effects, including overdrive/distortion, along with a Carvin BX1500 head and a single Carvin BXR 10.2 cab. My problem, as some of you have posted about, is that the Line 6 overdrive/distortion models drop the low...

This thread convinced me to take the ebay Kona plunge too! My 5 string, zebra wood, 'Warwick Double-Buck' look alike arrives tomorrow! I'll let you know how it turns out!

Hi! The top 12" speaker in my Hartke 2200 2x12 cab started crakling during sound check a couple weeks ago (this cab has kicked ass for over 10 years!). I popped the speaker out today to find that there is a fuse with a broken filament (it's on what I believe to be a crossover circuit board...

I see this thread is a couple years old, but I'm in the same situation. My Hartke 2200 (2x12) cab died during sound check, and I see that there is a fuse with a broken filament. Do you know the part # of the replacement fuse?