Recent content by kosscher

Thank you Bruce. You answered my question. Will keep your expertise in minds.

Bruce, appreciate your intention to explaine this case. To cut the fingerboard is not the issue with CNC But when glue taped fingerboard board to the neck board the heel side become higher +0,030" and becone "non-horizontal". My question was, should i do taper compentation on the neck board...

Bruce, thank you for reply. Yes, you got my concern. But the second part of the question was, what is the "right" way to compensate taper? I feel like neck board need to be cut with taper from nut to heel to about 1mm, as you mentioned. Am i right in my conclusion?

Dear TB Mates I am building my first PB neck. Need your expertise on the fretboard radius (fretboard arch height) compensation. Say the 1st fret arch height is ~0,9mm the 20th fret arch height is ~2.1mm and the total fretboard thickness on the 1st fret is 4,9mm and 6,1, with the height...

I know, i know, actually you can check the scale based on the grid which 1 inch step.

Thank you. Really useful. Maybe you have a neck also))

Any success? Please share)

BTW, have you got a good 3D model? Can you share the source?

Hi Talkbass mates. Got access to CNC. Please advice a shop or link to download classic PB 3D or a good 2D, to buil 3D out of it, for cnc. Want try to build classic copy for myself. looking for 1p maple neck design. Advise appreciated!

Amazing time capsule! Congratulations

@charliedurnin Have you manage to identify the vendor and the model of this peg? Regards, Konstantin

Hello everybody. The same question here, I need schematic or repair advice on the typical MiniMega1000 problem described earlier- the amp is working fine (gain, volume, tome part) itself, aside of the features controlled by the microcontroller board (incl. effects and lights). I did check the...

Zuma, yes, replacement is not hard to find, but I am looking for original one.

Dear Clubmates, for my SB I'm searching tuner like from attached picture. I would appreciate if someone can help to buy one...

Hi. Let me join the club with my new bass. Spector NS-2000 Korea (1998 as per SN). It is on the way. What is the general opinion about the Korean necktrough body and what is good way to go with pickups and electronics mod on this bass. Please understand, not possible to read 4000 messages ))...