Recent content by Palta_Bass

Hi! First of all, I apologize for making a old post come back to life hahaha. Now, I've recently purchased one of this cabs. I went to the guitar store with my rig (an Ampeg PF 500 and a Cort Artisan A5 plus) and tested 4 different cabs: this one, a Hartke 410 XL, a HD 410 and a HD 410b. I...

Hi! I've recently purchased an Ampeg Portaflex 500 (500w rms at 4 ohms) with a Hartke 112b cab. Do you have any advise or tip to set up my bass head? From what i've been reading, even if the 112b is 300w at 4ohms native, it could handle a higher wattage head like the TX600. It's my first class...

So, when the EXP is bypassed, it sounds like a regular tone pot? I bought one on Aliexpress, and I'm waiting for delivery. I'm gonna install it on my Samick Artist "Precision" bass (ripped off the jazz bass pup) replacing its original 9v booster. The stock pickups doesn't sound bad at all on...

I thought that you refer to the pole magnet, not the pickup hahaha

So, it isn't a issue on every pickup?

How can I low the pole?

Hi! Did you have any problem with the P bass pickup? I put a Wilkinson P with ceramic poles and the A string sounds louder than the D and G strings, I've adjust the coils at the same height. How can I fix this issue?

Hi! It's me again, I've only found 16mm musicman style bridges on eBay. It will work if I purchase one? The nuth width of my bass is 42mm.

I have a Mooer Funky Monkey, but I can't find a nice config to get the sound that I want (a lil' synth like, to mix it with a thunderball fuzz),what can I do? Keep trying configs or sell it to buy a bass sweeper?

And how can you a Musicman style bridge on them? Implying that they are 17mm scale like PD: I have a samick artist series 5 string bass, 16.25mm spacing, can I put a 16.5 bridge on it? I want to upgrade it and I don't find a same spacing bridge replacement.

What about the new string spacing? Is it 16.25 or something similar? (Where did you buy the new bridge?)

Okay! I'll be posting the process! I was thinking about buy a korean made bridge, that seems like Hipshot A (I don't want to invest too much money on it, cause' i don't have it)

If the string are not in the edge of the fretboard, It'll be fine hahaha. Btw, i think that I'm adding 1mm to the total (4 spaces between 5 strings)

Hi! As the title says, i want to know that if is possible to increase string spacing on a bass guitar? I have a Samick Artist Series 97' MIK and I want to upgrade the bridge, but I don't find a 16.25mm one, so I'm thinking about getting a 16.5mm one. Would I have problems? The nut is 45mm...

Hi! I have a Washburn Rb 2000, pretty cool bass, but I want to change the bridge in the near future. It is possible? I was looking for Badass tipe of bridge (Omega or Hipshot Kickass). Greetings!