Recent content by questionmark?

Thank you! Yes the E and G string are close to the edge but it's not a problem, especially from the 12th fret to the 1st the edge is far enough from the strings.

Thank you! it's easy to play even the spring spacing is bigger than the usual and the sound is brighter from a fender p bass due to the stiffer wood i used.

i'm in for the plain jane with 3 types of wood.

after a year i finally managed to complete my first built!! Link Removed Link Removed Link Removed Link Removed Link Removed Link Removed Link Removed

sorry i didn't mentioned that it's fretless

that's true, i hold it with my fingertip at the right place (i marked the position of the saddle before) but you can put the saddle a bit forward so when you tight the string it goes at the right place. The most basic thing is to intonate once and mark the saddle position for each string.

I don't think that wooden bridges are out of interesting nowadays so forgive me for resurrecting this thread, this is my version with stainless steel saddles moving back and forward for intonation tuning AND switching from 34 to 35 inches scale (maybe 34 and a half). the shape of the saddles...

haha empty head maybe?

i received an email from Becky at 27 of september that she shipped them. I just wait for the package now.

two more. why i can't upload up to two at once?

ok here are the pictures :cool:

So! the project is about to complete! after almost a year strings are in place and some noise is producing. Everything is handmade except the strings, the tuners and the truss rod. The nut is from synthetic marble, fretboard and bridge is iroko and the saddles are made from stainless steel...

Maybe the fb under the not buzzing strings is deeper sanded and under the others is less so the action is not the same as it was. Try to increase action at E and A or check the action at nut, maybe you need to raise the nut from the E side a bit.

well done!!