Recent content by rvdbrand

I have made a few pictures. The cone has the number 79629. The magnet is about 19,5cm or 7,7 inch. They sound okay and have lot's of volume. I think they are the 200 watt versions.

Recently I bought an old Mesa Boogie 1516, but I noticed that the 15 incher was replace by a Kappa 15 pro. In an effort to make it original i found two old subs with Electro Voice 15B speakers with only the number 535. But I would have expected 815.... what could that number have come from?

TecAmp from Germany makes a 215 Link Removed And a 2x12+2x15+4x10 :-P

I've added an V4B to my ampeg collection :-D Member 305 :-D --> Can I safely turn it on standy if the output transformer is broken?

A Cort with Might Mite pick-up sounds like a C series. I've got the Artisan C5 (with those might mite pick-ups) I just love the dark wood used for the necks. (dutch site, one picture on it) Invalid Link Removed

There should be three groove tubes inside, one with a red logo (1st) and two with white logo's on it. I didn't see any difference between them. Replaced mine with sovtek 12ax7wa's

Invalid Link Removed Invalid Link Removed Invalid Link Removed Maybe the above stores still have them, or try music productiv in germany, they would be happy to ask around a bit I think. >> SVT 12HE good choice ;-D

Well the cab you have is 4 Ohm so that's what you'll play at. No choice on the amp for that. The speakon cable that comes with the amp is a special one. It is connected through 1+ and 2+ (I think) of the speakon connector and thus only works on the mono-bridge connector. The other connectors...

I'm using two 4x10's (410HE) with the 4PRO and it works quite well. The cabs are 8 Ohm and on 8 the amp delivers 300 watts per side. Before I used them bridged to get 1200 watts at 4 ohm, but it wasn't necessary and the lows got a little less nice. But with the low A it had a little bit of...

Link Removed Link Removed ESP Ltd JM-500, even the hardware on it is dark chrome.

Link Removed Link Removed Got two of these, one with black hardware and one with a kind of brushed silver color. Silvery but not shining. This way my spare bas is the same as the one I'm playing ;-) by the way, this is supposed to be a artisan c5 (yes with might mite pickups) to bad old...

Just 1.14 Tortex (Pink/purple ones) But we have had them printed at www.steveclayton.com because that was cheaper than normal ones here in Europe :-D

SVT-4PRO SVT-410HE (two of those) Saving money for a bigger car and then a SVT810 :-D

I've tried a 410HE (500 Watt) and an 15" cab (200 Watt) but they just didn't match. Now I use two 410HE cabs and they go low enough for me :-D