Recent content by stampede_bass

So whats ur ideal cabs? I currently use basson 810 for touring which i love but its 230 lbs... Locally i use schroeder 212 but lacks heavily in the bottom end department.. Have used ampeg in the past and doesnt cut it, behringer no need to explain there. I like eden cabs but im looking for...

how bout running different Ohms to each channel. For example the 410 would be 4 ohms on output 1, and the 115 would be 8 ohms on output 2? is that ok to do?

Everybody gets scared when they hear XTI 4000 but i have actually been using that power amp for years now. I run it thru a basson 810 that handles 2000 watts, and most of the time i use a schroeder 2 12" that is rated at 1000 watts. I have never blown a speaker yet. AT 8ohms the xti would put...

So i use a crown xti 4000 as my head, and have a Petrounov Preamp going to it. I plan on buying a markbass 410hr and 115hr. My question is should i buy 8ohms cabs and run my power amp in bridge mode and daisy chain the 15 from the 410 (makes a 4ohms load). Or buy 4 ohms cabs and use a left and a...

thanks for the info it helped alot. i tried looking through my sansamp manual to see if its a balance output for the 1/4 inch output and it does not say it is. i know the XLR outputs are balanced, so im assuming the 1/4inch outputs are balanced as well. (there are 2 the affected and unnafected)...

ok so i have a sansamp preamp connected to a crown power amp to power my basson 8X10 Cabinet... should i use XLR to 1/4 inch or XLR to TRS? what is the difference between the TRS and 1/4 inch; and which one will sound better or no difference between the two? thanks!

what about crown vs QSC?

so does anybody have any expirience with these power amps and this pre amps? any opinion on which one i should get? Invalid Link Removed or Invalid Link Removed the behringer price is soo good compared to the crown, anybody got any experience with the behringer? is 4000 watts at...

yeah thats the same thing i learned about behringer haha... i blew out their 810 cabinet twice like i said, that was supposed to be rated at 2000 watts, yea right haha. blew it with my 1100 hartke head

the carvin is 1300 watts at 4ohms.. this is what the sheet of paper that came with the basson says "Your power amp Requirements Minimum Required Amp Power rating must be: 1500+ watts at 4 ohms per channel DO NOT underpower this cabinet or damage to the speaker coils may occur." im...

thanks for all the input guys. the head is underpowering i can tell a little. for some reason it does not feel as powerfull as it was before; for example in practice studio there was no way i could put the volume up to 5 with my old cab. now with the basson i can put it up to 5 and doesnt feel...

anybody know anything about this and underpowering?? how high is the risk of something bad happening??!!

hello, i purchased a basson 8X10 cabinet. they recomend to use a head that has 1500 watts or more to power the cabinet. Here is my question, i have a hartke LH1000 Head that pushes 1100 watts at 4ohms. this head seems to be very powerful for its rating, i blew twice a behringer 8X10 cabinet that...