Recent content by thebas

Thanks

Yes. Sorry for my bad English. Cable is working with no problems, thought. Any reccommendations about type of cable I should look for to not to have those sounds?

Hello, I have (a friend's) bass cable TS-TS 6mm jack, 3m, Bespec with orange connectors. Its going from bass to the mic100 preamp. I found out that that cable acts as a microphone!!! Let me explain. When everything is connected and turned ON if I say use middle of the cable and fit the flour...

Thanks alot. Got it finally. I wait for a conversation with a seller regarding TS "balanced" cable :) Best regards.

Thank you. So, its not the Shield but the inversed two signals that cancels the hum and noice. Does every TRS cable has shield around signal wire?

So difference in balanced cable is that balanced cable has SHIELD that is connected to the ground and all interference simply dont get to the positive wire in the center of the cable? So, the ground is all way around + and- wires, right?

Hi, I found a XLR female to 6.3mm jack cable 3 meters in a local shop. The seller says the 6.3mm jack is mono jack but the cable is balanced. Is this possible? I mean, it need to be stereo jack for a balanced cable, right? Am I better using 6.3mm jack to 6.3mm jack cable or XLR to 6.3mm jack...

should be next tom the MIC input on your pc's sound card. usually blue colored.

well, probably you need a RCA to stereo 1/8" mini plug to connect it to PCs sound card LINE IN. regards

what sound card - or interface you have in your PC? cabels from mixer go from OUTPUT white/red RCA on the mixer to the PC. you plug guitar into LINE IN 1 or 2 on the mixer. You better to have some preamp between bass and mixer.

Thanks, will try. What you recommend, for the distance between string and pups?

Well, I didn't understand you 100%, but, yes, I havent played bass before. It is my first bass and I dont know anything to play. Only 1 song that I learned today - Wicked Game - Chriss Isac ;) heheh I dont like to buy low end items. So I thought it is better to buy a old 800$ product, used...

Thanks Charling. I'll remember that! My amp is at 9 o'clock and that gives me enough sound. Regarding bass trough PC, I finally connected everything: Mic100 preamp, Washburn Headless bass, 1212m interface, and Hifi system. Everything seems ok. There is no hum or noise (more than usual). The...

Hi, on a second day with bass.... connected like: bass>mic100preamp>in EMU1212M out>Kenwood hifi 150wpc amp>Infinity 3way flourstanders So, For the sound, there is no any noise. The sound is clean. Im using balanced connection between preamp and 1212M. There is no big dif between neck and bridge...

Thank You once again ;)