2 ohms

[guitarman64]

Looking for a 2 ohm bass head.

 

[dbsfgyd1]

Looking for a 2 ohm bass head.

My Mesa WD-800 will work on a 2 ohm load.

 

[Wasnex]

All of the Mesa Subway 800 amps can do 2 ohms.

The Bergantino Forte amps can do 2 ohms.

Quite a few tube bass amps can do 2 ohms. Ampeg SVTs, Ampeg V4B, Ashdown CTM300, Ashdown CTM200, Ashdown CTM100, Fender Super Bassman.

 

[abarson]

All of the Mesa Subway 800 amps can do 2 ohms.

The Bergantino Forte amps can do 2 ohms.

Quite a few tube bass amps can do 2 ohms. Ampeg SVTs, Ampeg V4B, Ashdown CTM300, Ashdown CTM200, Ashdown CTM100, Fender Super Bassman.

All Mesa Subway except the D-350, which only goes down to 4 ohms.

 

[michael_t]

GK Legacy 500/800/1200.

 

[el murdoque]

Peavey Mark III / Mark IV from the seventies and eighties are two ohm heads.

 

[Averell]

Eich T1000 : 2x500W 2 ohms amp. You can plug four 4 ohms cabs on that thing.

 

[izpak]

EBS Reidmar 502 and 752 can run 2 Ohm loads, along with the EBS 802 and Classic 500

 

[billiard]

Seymore Duncan used to make one. 800 watts at 2 ohm solid state

 

[ziko]

All Darkglass heads except exponent, Fender Rumble head, Hartke LH1000 has two poweramps, each capable of 2 ohm

 

[REV]

Eden WT 500 and 550 will do 2 ohms.

 

[Aussie Player]

Marshall VBA400.

 

[TTA]

traynor yba300 does 2 or 4 ohms at 300w. 250w if you run 8 ohms.

 

[bassguitarist85]

SVT-CL
Traynor YBA300
Peavey VB-2
Peavey VB-3
Peavey VB-MA
Peavey MAX700, MAX450, MAX160

All can do 2 ohms, but many others can as well.

traynor yba300 does 2 or 4 ohms at 300w. 250w if you run 8 ohms.

An internal jumper mod can get you the full 300W at 8 ohm. It's Traynor approved.

 

[TTA]

SVT-CL
Traynor YBA300
Peavey VB-2
Peavey VB-3
Peavey VB-MA
Peavey MAX700, MAX450, MAX160

All can do 2 ohms, but many others can as well.


An internal jumper mod can get you the full 300W at 8 ohm. It's Traynor approved.

yes it turns the 2 ohms setting to 8. requires under the hood work