• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

7 sharp 9 voicing on 4 string?

Is there a 'correct' way to voice a 7sharp9 chord on a 4 string?

When playing 7 chords, I would normally use 3 notes: I play the root on the E string, the 7 on the D string and the 3 on the G string and ignore the A string - but the problem with this chord is that it also includes an augmented 2 (the sharp 9) as well as the 3. So do I replace the 3 on the G string with the augmented 2? If I do that, it becomes the same voicing as a minor 7 chord. Or, should I play root on E string, 3 on A string, aug 2 on G string? I could also play the 7 on the D string, but then I'm using all 4 strings, and I end up with a very muddy sounding chord. Or is there another way?

Hope this makes sense!
 
dont play the root

You've answered your own question!
Not practical on a 4 string bass. Mud City.
IMO.
Thanks.

I can avoid the mud if I don’t play the root, thanks for that suggestion. I think I’ve found a workaround, if I don’t pluck the root, but tap it a little later while the chord rings out instead, it sounds nice. It’s a v slow tune (La Mesha by Joe Henderson at 60bpm) so I have time.
 
  • Like
Reactions: Don Kasper
For a E7#9. You could play an open E, G# on the 11th fret of the A string, D on the 12th fret of the D string and G on the 12th fret of the G string.

From low to high
Root
Major Third
Minor Seventh
Augmented Ninth

In this voicing the fifth is ignored.

Change the open E to an E at the twelfth fret. This gives you a moveable chord shape. Bottom three notes are a typical seventh shape.
 
  • Like
Reactions: Whousedtoplay