80's-90's Ampeg solid state

[Calaverasgrande]

Long story short. I used to own an Ampeg solid state head. For the life of me I can't recall the model, and I can't find a picture.
All I recall was that it was black with blue graphics. Had no graphic EQ. Just the plain old knobby eq and a limiter. No tubes at all. And it followed the same general form as a "real
SVT".
I've been trying to figure out the model, but every review I see describes a "great amp". I couldnt get this amp loud enough with two 4x10 cabs. Which is why its gone.
Any body have any idear? OR can they point me to an AMpeg site that lists the various models?
I am kind of confused because it almost seems like ampeg had 2 solid state heads with basically identical features, and they just kept changing the name.

 

[mikeswals]

I happen to have an old 1992 price guide nearby, and it shows two solid state heads then:
SVT200TH, 350w with 6-band rotary eq.
SVT400TH, stereo 200w per side or 400w mono, also 6-band rotary eq.

 

[anderbass]

Was It a V6-B?

 

[GLEN18INCHSPICA]

Probably a SVT200T. I had one Ibought brand new around 1989 with the same blue on black color scheme, it served me well for around 4 years. I actually bought another one last yeat to revisit the tone. Its a good preamp, with the push & pull knobs that change the frequencys, very versatile & probably my favorite Ampeg solid state offering.

 

[anderbass]

The V6-B and 200T didnt have blue graphics the op mentioned, but the 200T did have a blue trim stripe:

 

[anderbass]

No limiter knob, but It coulda been a BT15 head, or even one of the combo models cut down/modded into a head...

At least this model had the blue graphics the op mentioned:

 

[anderbass]

How about a BT-140:


[Invalid or Expired Link Removed]

 

[JimmyM]

Maybe an SVT 3 nonpro?

 

[chadds]

That pic is of the preamp that went with the SBT.
When the SVT was first introduced so was this. It came with two 2x15 Altec 421, powered cabs.
This is a tube pre.

 

[Calaverasgrande]

The V6-B and 200T didnt have blue graphics the op mentioned, but the 200T did have a blue trim stripe:

It looked a lot like that though I do not recall anything about it being bi-amp. As far as limiter, it didn't have knob. It was just limiter on/limter defeat. IIRC you pulled the master out to defeat the limiter.