Can i connect them without damage? i read on another thread that an 8ohm cab won't be as powerful but wont do any damage. Is this true?
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
8ohm cab to a 4ohm head
- Thread starter Ironderby
- Start date
It is no problem. If it is a SS head - you can connect anything as long as it is not below its minimum rating - usually 2 or 4 Ohms. Of course the power will be reduced somewhat at 8 Ohms, but it is hardly noticeable.
For a tube amp - the output selector or tap or whatever has to be set to match the cab.
For a tube amp - the output selector or tap or whatever has to be set to match the cab.
This should cover it for your amp:
4 ohm head + 8 ohm cab (1) = ok
4 ohm head + 8 ohm cab (2) = ok
4 ohm head + 4 ohm cab (1) = ok
4 ohm head + 4 ohm cab (2) = NOT ok
4 ohm head + 8 ohm cab AND 4 ohm cab = NOT ok
Side note: Never let anyone other than yourself hook up your amp and cabinets. Always check cab ratings first, connect your cabs, then power up to avoid future complications.
4 ohm head + 8 ohm cab (1) = ok
4 ohm head + 8 ohm cab (2) = ok
4 ohm head + 4 ohm cab (1) = ok
4 ohm head + 4 ohm cab (2) = NOT ok
4 ohm head + 8 ohm cab AND 4 ohm cab = NOT ok
Side note: Never let anyone other than yourself hook up your amp and cabinets. Always check cab ratings first, connect your cabs, then power up to avoid future complications.
