For my own reasons I modded a BagEnd 2x10 cab to offer either an 8 ohm or 2 4 ohms loads.
This was done by replacing the drivers and adding a selection switch so the speakon connector was either 8 ohms on pins 1+ and 1-, or a 4 ohm load on each of the 1+/1- and 2+/2- connections.
If this seems interesting you can see more details at
[Invalid or Expired Link Removed]
This was done by replacing the drivers and adding a selection switch so the speakon connector was either 8 ohms on pins 1+ and 1-, or a 4 ohm load on each of the 1+/1- and 2+/2- connections.
If this seems interesting you can see more details at
[Invalid or Expired Link Removed]
