ampeg 410 cabs

[johnnynitro]

I looking for a new Ampeg cab I want the 810s But im not shure it will fit in my car What two Ampeg 410 cabs would work well together ? I was looking at trying two different models of Ampeg 410s but Im not shure what would work well together ! I used to have a 810 years ago And remember being able to shoehorn it into some mid sized cars But also remember thinking that without a pickup truck I was rolling the dice on transpo ! As far as heads go Im up in the air on an SVT3 pro & 7pro Or the portaflex 500 Also looking at the portaflex 410 ( When it comes out at the end of may )But wondering about the (don't laugh too hard) projection of this cab Will it sound good away from the stage Also @ 800 watts im wondering if two might be overkill ?

 

[chaosMK]

One 4x10 should be fine especially if you dial things in well. If you guys are ridiculously loud, you can always add a matching one (note: B-series is lesser performing... the B410 is 200w)

 

[carl h.]

SVT 410HE 8 ohms each for a 4 ohm stack.

 

[JimmyM]

+1. 410he is very close to the 810e.

 

[johnnynitro]

Thanks everybody,Thats what I was looking for !!