anyone else have a Peavey 215(black widow) ??

[ezstep]

The shallower one is ~13 inchs deep, the deeper one is ~18inchs deep (from memory).

Also from memory, 14 inches deep and the "deeper" one was 19 inches. I had the shallow one, and it was my main cabinet for years, under a tube MMHD150. I wish I had that combination again. Crystal clear yet deep and gawdawful LOUD!!! From what I recall, it was about the same weight as a 4x10 cabinet, but easier for one person to move around.

 

[PawleeP]

nice..thanks!

could you do me a HUGE favor and measure the dimensions?

24w x 18h x 15d (per chamber) = approx 3.6cf (per chamber)
Is there a good thread dedicated to peavey 215d cabs, and black widows (the old 1504's).. am refurbishing one as we speak and need info on port mods, dampening and wiring.. pp

I added a few pieces of wood around the vents (all sides but the bottom since the rectangular ports are only about an inch away from the edge) vent(s) length is approx. 2"


Wondering if 2 older 1504's (4ohm) wired in series is as good as 2 1502's wired parallel?

Is there any benefit or detriment to putting a cross vent hole(s) between chambers?
how do i tell what year mine is?
mfg loc-03 JBK18 ser# 00-05362555
pp

 

[BassmanPaul]

The OP hasn’t logged in for over two years!

 

[PawleeP]

The OP hasn’t logged in for over two years!

lol, ok, i get the point, however someone may have answers for me..
just tried this thing this eve, and one of them (the BW 1504's) has a slight buzz, does anyone know what the difference is between the 1504 and the newer 150? DT 4ohm black widows, (i am on the hunt for a replacement now), not sure what the DT means