Anyone have a source for a 30" slotted fingerboard?

[Englishman]

Ever since LMII left us, I'm having a hard time finding sources. I don't have a fretting template for 30".

I did find a Chinese outlet on eBay, but the quality just isn't there (shock) I've never seen a chippier piece of rosewood.

 

[Carnelis]

If you want to go the diy route, you can generate a fret slotting template. I used this person's file in Open SCAD to make a 33in scale template (attached image is the one I made).

https://www.printables.com/model/1523474-open-scad-3d-printed-fret-slotting-template-genera

It just takes a little bit of reading to use the open SCAD file and modify it. Only had to put in a couple numbers and it does the hard work for you. The creator has good instructions included in the download.
I have a 3D printer, so I printed it in 3 parts. Even if you don't have a 3D printer, there's a lot of print shops nowadays. Even some libraries let you print things.

 

[Dark Horse]

You can also get a preslotted board in 34” scale and cut off the first two frets…

That yields a 30.294 scale, which is plenty close enough for 99% or people

 

[pedrodelawasp]

You can also get a preslotted board in 34” scale and cut off the first two frets…

That yields a 30.294 scale, which is plenty close enough for 99% or people

This had never occurred to me! Genius!