• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Anything Eden Thread

#2
I have a WT550 amp and a D210XST(4 ohm) and am considering adding a D210XLT. The only issue is that the local store has only an 8 ohm model in stock. Do you see any problems in conbining them for an impedance of 2.67 ohms? And what's your take on putting the XST on top and the XLT on the bottom. Or might I be better to consider a different cab to partner with the XST? I just love the Eden sound and feel that I would like the XST to sound a little dominant in an XST/XLT combination. Thanks!

snowbird
Chris
 
#3
snowbird said:
I have a WT550 amp and a D210XST(4 ohm) and am considering adding a D210XLT. The only issue is that the local store has only an 8 ohm model in stock. Do you see any problems in conbining them for an impedance of 2.67 ohms? And what's your take on putting the XST on top and the XLT on the bottom. Or might I be better to consider a different cab to partner with the XST? I just love the Eden sound and feel that I would like the XST to sound a little dominant in an XST/XLT combination. Thanks!

snowbird
Chris
Click to expand...

Hey Chris, as far as the 2 Ohm thing goes It is not a problem to run the WT550 at that Ohm rating. However make sure you have good ventilation all the way around the head as it will cause it to work a slight bit harder......Since the Xst is Slightly Different in Frequency Response, I think it will Pair fine and Even Add a Little Depth in the lower Frequencies!!!! I would Actually put the XST on the Bottom, If it were me.
 

Latest posts

Top Bottom
Back