Aquilar

[frank cucinotta]

Hi Can I run a DB4X10 and a DB 2X10 with my DB751 with no problems?

 

[Scott Lynch]

Yes, though I would recommend making sure the 410 is 4 ohms and the 210 is 8 ohms to make sure power is being distributed equally to the speakers. The DB751 would be running at 2.67 ohms - should be fine.

 

[Gearhead17]

If they are both 8 ohm cabs, each one will get the same amount of wattage and you will be limited to how loud the DB 210 can go. In this setup, make sure the 210 is on top so you can hear signs of stress.

 

[jeff7bass]

Yes, though I would recommend making sure the 410 is 4 ohms and the 210 is 8 ohms to make sure power is being distributed equally to the speakers. The DB751 would be running at 2.67 ohms - should be fine.

THIS.

 

[S-Bigbottom]

All the above.