Bass strings for drop A#

[antte95]

Hello, my band plays in drop A# (A# - F - A# - D#) and I would like to play in that tuning with my 4-string P bass and I would also like to know if it's possible to play in that tuning with .110-.55 gauge strings. I know it's a really low tuning but I would appreciate any answer!

 

[devilman666]

I would play a set of dr drop tune strings for a five string heavy 135 with 115 95 75 55 then just trash the .55. Or order a set from just strings .com of singles in the dr low rider and get the smae gauges minus the .55. I play in "A" on a five and run a 145. low string with a hybrid of other guages to get the correct tension of the standard tuned correct guage string so that neck and intonation adjustments are minor at best . The .110 is too small a standard "b" is 125-130 and you want to go lower. If the low string is loose you will loose the real note and end up sounding like fieldy from korn nothing but clicking and a banging.

 

[mmbongo]

Yeah just get the biggest 5 string set you can find and don't use the top string.

Or better yet, go to Bass Strings Online where carries a bunch of singles and can even do custom sets with whatever gauges you want! Jason is the only guy I'll buy strings from, he will hook you up.

Invalid Link Removed

Be sure to register and include you are a talk bass member in the comments and he will set you up as a vip for special discounts automatically.

 

[SLaPiNFuNK]

There are also from 4 string sets that are B E A D, They are usually .135 .105 .085 .065... They would work tuned up A# F A# D#

Though: .135 .100 .080 .060 would be ideal.

Tuning a .115 to E let alone up a half step to F may be a bit tight...

 

[devilman666]

Correct sorry for some reason I was thinking Flat not sharp so I agree 135-100-80-60 would be perfrect

 

[SLaPiNFuNK]

Had a feeling that was the case... When I first looked at the set as well I started thinking of heavier gauges but its actually tuned up a half step w/ the drop.

Sounds good to me!

 

[ixlramp]

A 110-55 set will result in a very floppy low A# with poor tone, only the higher strings will be okay.
Don't waste your money buying a G string you won't use. Build a set of custom strings: 145 95 70 50 will have medium-light and equal tension strings. A 135 will also work for A#.
Or ... Circle K Strings sell 'drop tune' sets designed to have equal tension strings in a drop tuning (top load bridge only) Link Removed

 

[H3R3T1K]

Correct sorry for some reason I was thinking Flat not sharp so I agree 135-100-80-60 would be perfrect

Are those gauges the same you would recommend for regular drop A on a 4-string (A E A D)? I want even tension across all strings.