Can I get a different sound out of these strings?

[facepalmmaster]

So i just bought a new bass, and the strings on it dont seem bad, but theyre very twangy. I like how they sound for slap and funk finger style, but for other things it doesnt sound as good. Should i set the action a bit higher to get a bit less fret buzz (i play a little hard) or is it a string problem? I dont know if i have the money to buy new strings, but id like to know. Also, if it helps, my bass is a schecter raiden elite 4.

 

[soulman969]

Every new bass I know of that's sold today comes stock with round wounds. Usually cheap round wounds. Most rounds will be twangy until you break them in. Some more so than others.

The fret buzz could be coming from the action being set too low or it could be the neck needs adjustment. It can also come from your technique or a low tension string.

When you bought the bass did they do a set up on it for you? If not the first thing I would do is a full setup to find out exactly where that fret buzz is coming from. If you're not able to do it the store should do it for you.

There are too many factors involved to tell you that new strings will make your problems go away but most of us do replace those cheap stock strings with a better set that we like. Start with a setup and go from there.

 

[facepalmmaster]

Every new bass I know of that's sold today comes stock with round wounds. Usually cheap round wounds. Most rounds will be twangy until you break them in. Some more so than others.

The fret buzz could be coming from the action being set too low or it could be the neck needs adjustment. It can also come from your technique or a low tension string.

When you bought the bass did they do a set up on it for you? If not the first thing I would do is a full setup to find out exactly where that fret buzz is coming from. If you're not able to do it the store should do it for you.

There are too many factors involved to tell you that new strings will make your problems go away but most of us do replace those cheap stock strings with a better set that we like. Start with a setup and go from there.

From what you said, its probably a mix of my style and cheap strings. I know how to set up the bass, i just cant seem to find the right size allen wrench to set the action, its feels like the action is also a bit too low. Thank you

 

[soulman969]

From what you said, its probably a mix of my style and cheap strings. I know how to set up the bass, i just cant seem to find the right size allen wrench to set the action, its feels like the action is also a bit too low. Thank you

I don't know what type of bass you own but most hardware stores or the hardware dept.'s in discount stores sell a set of standard and metric allen wrenches that are attached to a metal ring like a key chain.

They're inexpensive and there's bound to be a size in there which will fit. You can also check with the manufacturer for the correct size or another poster here may be able to tell you.

The neck relief and the neck angle may both need to be adjusted. It those two adjustments aren't done well then your ability to adjust the action just from your saddles may be hampered. Take a look at all of it as each is a part of the whole.

A higher tension string may also help you eliminate some of the buzz and rattle. If you're an aggressive player you may want to use a higher tension string. Good Luck!