ok, so here's my current setup:
Bass (Passive P bass)> Morley A/B> Boss GE7B EQ> EH Russian Big Muff> EH Russian Bassballs> EH Russian Small Stone> Biyang Tremolo> Boss BF2 Flanger> EH Nano Clone Chorus> Boss TU2 Tuner> Amp (GB GBE 600/4x10)
soon to add a vt bass, that's another thread....
the issue:
the nano clone is noisy and drops my signal.
experiments:
1.i tried bypassing everything, same problem.
2.i tried the effects loop. it added unpleasant distortion.
do i just need a different pedal?
is there another approach i'm not thinking of?
i figure if isolating the pedal by bypassing everything else (guitar>pedal>amp) has the same issue, then where it's at in the chain doesn't much matter?
Bass (Passive P bass)> Morley A/B> Boss GE7B EQ> EH Russian Big Muff> EH Russian Bassballs> EH Russian Small Stone> Biyang Tremolo> Boss BF2 Flanger> EH Nano Clone Chorus> Boss TU2 Tuner> Amp (GB GBE 600/4x10)
soon to add a vt bass, that's another thread....
the issue:
the nano clone is noisy and drops my signal.
experiments:
1.i tried bypassing everything, same problem.
2.i tried the effects loop. it added unpleasant distortion.
do i just need a different pedal?
is there another approach i'm not thinking of?
i figure if isolating the pedal by bypassing everything else (guitar>pedal>amp) has the same issue, then where it's at in the chain doesn't much matter?
