1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

SOLD Crown Macro Tech 2400 and SKB 6 space rolling rack case

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by Jeff Roller, Oct 4, 2017.


  1. Jeff Roller

    Jeff Roller Jeff Roller Gold Supporting Member

    Dec 24, 2007
    Maryville, TN
    Price:
    550.00
    Location:
    Tennessee
    Tons of power, and if you're looking you know these are bullet proof!
    I kept it mainly as a backup, but as it pretty much sits in my climate controlled garage unused, I would like to rehome it.

    I've listed some of the specs below, but everybody has google at their fingertips. One major plus for me is that it handles loads under 2 ohms in the bridged mono mode. If you need to daisy chain every cab you own at once, this is your amp!

    The six space rolling SKB case is very nice (model # SKBR6W). If you take notice, I fabricated a heavy duty support system for the rear of the amp using commercial grade heavy gage angle iron. One of the perks of having a metal shop accessible!

    The tuner and optimizer are not included, but the aluminum brace and the rear vent port are. Heck, if you don't haggle with me on the price, I'll most likely include the tuner and optimizer.

    The catch is, this thing is bulky and heavy and I really do not want to ship it, so local sale only. If I have to, I can meet you within a few hours of 37804 after receiving payment, we will just have to work out a weekend day I can do this.

    If you are not local and MUST have this shipped, PM me and we can discuss, although the buyer will be responsible for the shipping costs.

    Paypal accepted, although if we are doing this local, cash would be nice. 20170919_195628. 20170919_195445. 20170919_195552. 20170919_195917. 20170919_195944.
    Specifications:

    Output power:

    1100W continuous @2 Ohm 20Hz-20kHz

    800W continuous @4 Ohm 20Hz-20kHz

    520W continuous @8 Ohm 20Hz-20kHz

    (Bridge mono) 1650W continuous @8 Ohms 20-20kHz

    Frequency response: 20hz - 20kHz ±0.1dB @1W Phase response: ±10° from 10Hz - 20kHz @1W Signal to Noise Ratio: >105dB 20Hz - 20kHz below rated output at 26dB gain THD: <0.05% from 20Hz to 1kHz and increasing linearly to <0.1% at 20kHz, delivering full rated power into 8 Ohms per channel IM Distortion: <0.05% from 10mW to full rated output at 26dB gain Damping factor: >1000 from 10Hz to 400Hz Slew rate: >13 volts per microsecond (stereo) Voltage gain: 20:1 ±3% or 26 dB ±0.25dB Mains power: 100/120/220/230/240 VAC 50/60Hz Dimensions: 2u standard rack mount x 406mm deep Weight: 23.5kg/51lbs.
     
    svtb15 likes this.
  2. jbares

    jbares Ragin'Cajun Supporting Member

    Nov 23, 2003
    Lafayette, Louisiana
    BEASTLY POWER! LOVE IT!
     
    Jeff Roller likes this.
  3. Jeff Roller

    Jeff Roller Jeff Roller Gold Supporting Member

    Dec 24, 2007
    Maryville, TN
    As stated, this is a backup amp, but of course I had to "test" it a few times. Here it is with a Phil Jones 16H (2 ohm) cab and 8T (16 ohm) cab, therefore the amp was totally stable with a less than 2 ohm load for a handful of 4 hour shows. It's proven itself very worthy, not just as a backup, but as a main amp.

    10256661_10202861401468528_1545461228044638892_o.
     
  4. Brother Goose

    Brother Goose The Process IS the Reward!

    Dec 4, 2013
    Syracuse NY
    God Is Love
    Wow. I can't imagine the gigantic elephants balls this must have...

    I used to rock a Crown micro-tech 600 and it was awesome. There are watts and then (as my father says) there are CROWN watts!

    GLWTS!
     
    svtb15 and Jeff Roller like this.
  5. svtb15

    svtb15

    Mar 22, 2004
    Austin,TX - McKinney,TX - NY,NY, - Nashville,TN
    I play it all. Whatever works for the gig
    The 800 watts from these Crown amps blows away the 800 watts from every class D amp that i have played. You feel it .
    I have an old crown PSA2.. A total beast. Your 2400 is a workhorse and one of the most beastly amps i've ever heard..
     
    Jeff Roller likes this.
  6. Jeff Roller

    Jeff Roller Jeff Roller Gold Supporting Member

    Dec 24, 2007
    Maryville, TN
    Thanks! You are making the case for me to keep storing it for a backup, but I have way too many killer amps right now. I'm trying to make someone a good deal on this, I'm basically throwing the SKB case in for free with purchase of the amp!
     
    svtb15 likes this.

Share This Page