Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
EBS BassIQ internal trim?
- Thread starter DrGroovenstein
- Start date
Ok, answer was in the manual. Anybody tried this before?
"High Frequency Mix-in
The EBS BassIQ pedal is equipped with a HF MIX-IN trimmer for futher fine tuning your sound. The function makes it possible to mix in an amount of the high frequencies from the original "bypassed" sound. The range can be set from 0% to 100% mix. The factor setting for the trimmer is set to 0%"
"High Frequency Mix-in
The EBS BassIQ pedal is equipped with a HF MIX-IN trimmer for futher fine tuning your sound. The function makes it possible to mix in an amount of the high frequencies from the original "bypassed" sound. The range can be set from 0% to 100% mix. The factor setting for the trimmer is set to 0%"
no but I will iafter I land David's. One complaint with lp filters is that when the threshhold is set for a low freq, your over all tone can get really dark. Sometimes to dark to be usable. So this might be a way to 'crisp' it up a bit. Interesting - I'll look forward to playing with that.
I cranked my trim to ~35%. When too high it seems like the filter doesn't trigger sometimes.....hrmm...
