Eden Parametric EQ - need help with settings

[Jehos]

Somewhere on the internet I once found a drawing that showed the Eden parametric EQ and what frequency each notch on the frequency selector knobs was. Does anybody have that? Any help would be nice. Thanks.

 

[JTE]

There's thread at the Eden forum that compares the flat settings of the WT-400 to the WT-550. But the EQ is pretty straight-forward. Because there aren't notches (stops) on the EQ knobs, I'm not sure what you're asking. The left one has a center that's adjustable from 30 Hz. to 300, the mioddle's range is 200 to 2K, and the right one is 1.2K to 12K, so there's a lot of overlap.

John

 

[~ignited~wings~]

I've seen the picture you're talking about but never saved it. Maybe someone has it on their computer.

For the poster above, what the OP is looking for is a picture which shows which locations on the frequency knobs are which specific frequencies.

 

[jjk2007]

I thought that pic was over at the Eden site. Someone graphed out what frequency each line represented on each knob. Hope that made sense.

Edit: Ignited Wings beat me to it.

 

[Vinny D]

[Invalid or Expired Link Removed]

[Invalid or Expired Link Removed]

 

[Jehos]

Heh, just came over here to post that Vinny D. Thanks for your help here and on the Eden forum!