• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Double Bass Edge Bumpers

A

anonymous12251111

Inactive
Apr 6, 2007
848
4
#1
Is it true that edge bumpers will dampen the side of your instrument slightly? My bass is in need of them as it's getting slightly scuffed up on the sides. Also, is there a material for them that works well? I would get a luthier to do this BTW.

Thx!
 
#3
Calvin Marks said:
Is it true that edge bumpers will dampen the side of your instrument slightly? My bass is in need of them as it's getting slightly scuffed up on the sides. Also, is there a material for them that works well? I would get a luthier to do this BTW.

Thx!
Click to expand...

some interesting and funny posts about bumbers you can find here


http://www.talkbass.com/forum/showthread.php?t=137754&highlight=bumpers
http://www.talkbass.com/forum/showthread.php?t=246926&highlight=bumpers
http://www.talkbass.com/forum/showthread.php?t=122771&highlight=bumpers
http://www.talkbass.com/forum/showthread.php?t=107984&highlight=bumpers
 
#5
Calvin Marks said:
Roughly, do you guys know how much I should be paying for these to be installed? The store I go to (Heinl's) charges about $80.00 per hour of labor.
Click to expand...

I had mine done during a massive restoration so I don't know the actual individual cost for the bumpers. The labor rate sounds fair to me. It is not a huge job but must be done carefully so as not to damage the Bass and so the Bass lays even on the floor with the Bumpers. Most old Basses are twisted to it takes some experience to get it right. How much are the edges of your Bass worth?
 
#6
KSB - Ken Smith said:
I had Arnold put them on my Gilkes. It never sounded better. perhaps it was the Bumpers that improved the tone after the restoration!;)

[Invalid or Expired Link Removed]
Click to expand...
Ken , are those Arnold's Leather Bumpers? He does those very well...I charge $75 for leather in my shop and of course quite a bit more for Ebony or Rosewood as the leather is flexible and easier to fit.
 
#7
Mark Carlsen said:
Ken , are those Arnold's Leather Bumpers? He does those very well...I charge $75 for leather in my shop and of course quite a bit more for Ebony or Rosewood as the leather is flexible and easier to fit.
Click to expand...

No, I don't think so. I think it is some type of Maple, possibly English to match the wood of the Bass.
 
#9
There was a long discussion of bumpers back in 2004. My good friend Paul Warburton suggested using segments of rubber fan v-belts for bumpers. I've tried them on several basses and when dyed flat black, they look just like ebony from a distance of more than a few inches. While carved wood bumpers might look a little more elegant to the eye, IMO the leather and rubber bumpers are less likely to crack a rib if they happen take a sharp hit. However, on my personal bass I have never used any type of bumpers and probably won't in the future.
 
#10
Bob Branstetter said:
There was a long discussion of bumpers back in 2004.
Click to expand...

That was a good thread. On page 3, I described some inexpensive rubber bumpers that came on my laScala when I bought it. While I'm sure the description sounded cheesy, they actually don't look half bad, and they do cushion the blow of setting the edges down very nicely. here's a pic (ignore the sleeping bald guy):

[Invalid or Expired Link Removed]
 

Latest posts

Top Bottom
Back