So I picked up a fretless. Sounds great, but the strings sound like they're rattling against the fingerboard, and sounds like fret rattle. Is this normal or is it just truss rod related and the neck needs straightened?
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Fretless bass "fret rattle"?
- Thread starter SMILEYSIXX
- Start date
Have you looked down the neck to see if theres indication of backbow or zero relief, too straight? I have known of a few basses and guitars that did have a little bit truss rod rattle to them. Is this possibly what your referring to if neck has a little bit of relief. Allmost dead straight but not quite?
It looks straight to me. Adding a little more give so the strings can pull it over just a little bit more may be beneficial.
Strings are tight over the nut too, so the issue isn't there.
Are you a fretless newbie? Fretless strings DO "rattle" against the fingerboard. It creates a characteristic sound that you may have heard people describing as "Mwah". That comes from the fact that if say you slide your finger up the fingerboard to another note, it makes a sound that sort of sounds like that. Of course, you may need to adjust the amount of "mwah" to fit your taste. This is done by the height of the fretless action. The lower the strings are to the fingerboard, the more "mwah" you get.
On the other hand, if the strings at a given note are not especially vibrating against the fingerboard at the point where you are pressing them to the wood, but rather are "rattling" against the wood further down the neck because the neck is not straight or has a slight relief but instead has a raised "hump" down there. That would be a defect and is not normal.
