• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Gallien Krueger Club. GK Rules !

I have a MB410-II combo that I use regularly with my 5-string basses with no issues. It's my first GK amp, I bought it new a year ago. When needed, I add my MBP410-II to it to give me 810's and 1000 watts. I love the flexibility and portability of this rig. Tone is a given.

GK_4-2_zps20d588a4.jpg


TD


I know they are really different, but how does the sound and build quality of these (awesome looking) 410s sound compared to the uber 810 and traynor 810 that you used to tote around Thornton?
 
Well just got home from practice. The rehearsal studio is the type where you rent it in three hour blocks and they provide the gear. You just bring your bass.

I usually bring my SWR Baby Blue II head. The room they give you determines the bass rig you get. Tonight the cab was a GK 410 BLX. It has no horn.

I LOVED it !! It has the tone I've been looking for all this time. The lack of a HF horn makes the tone richer, fuller, warmer. I play in a blues / funk / jazz band and I tend to have a too modern tone with my active basses. This cab was killer !!

I think I would prefer a horn , but to turn it on maybe less than 5% total ; just barely.

What are your thoughts on 410's with no HF horn ?
 
TL072's
Invalid Link Removed
LF353's
Invalid Link Removed

Not sure about the MB series.
I used the TL072 for the preamp section and LF353 for the power section.
I suggest you contact B-string or wait for him to chime in since he is much more knowledgeable in this area.

He might even have you plug into your FX return to see if your preamp is the culprit.

Thanks for the info, IIRC, I did pump a signal into the FX return - it's the preamp that's noisy. The power section is a commodity part from ICE.
 
Howdy all,
Wondering how folks are getting on with reliability of their second series MB212 (or other MB combos). They tick so many boxes especially sound and weight! I have found a little in here discussing but I guess time is always the best test for reliability questions so thought it was worth a revisit. Cheers all!
 
I haven't heard of any issues with the series II's. G-K seems to have taken care of the earlier models' occasional cabinet buzzes, poorly placed DI jack, etc. during the rework.

My MB110 gets a lot of use, and it has been 100% reliable so far. One of my nitwit friends slaps through it whenever he comes over, and he hasn't managed to blow the driver yet, which is a plus! However, I rarely push the volume control past about 1 o'clock, as it's my small gig and living room amp.
 
So, I've recently moved to flats on all my basses (all Ibbys!). My SR505 sounds fantastic! Loving the new tone! And with a slight EQ change, I've found my tonal nirvana. I've been able to play plenty loud and no negatives. The problem is my SR406. It seems to make the cab fart, even at lower volumes. I'm thinking it must be the flats, since I know that this is the only difference (I run them both on the same EQ, and let the basses' natural qualities make any differences). With some minor EQ changes, I got it under control, but I was just wondering if you guys could share any tips/info.

For more specifics, I am using RB heads (700 and 400). The note that is most prominently farting is the open E. Was it terrible? No, but it definitely didn't sound good. Not smooth at all. Nobod I used to have the woofer maxed. That's been one thing that has been consistent with all my EQ choices on my rig/s. My EQ is lows at 10:00, hi mids at 2-3:00, low mids at 11:00, and bass at 1-2:00. I'm getting an Fdeck Series 3 soon (just ordered it last night!) to function mostly as protection for my cabs. I've been thinking of getting one for months, well before this problem started.