• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Genz benz shuttle 9.2 won't work need help

Hi all
I have a genz benz 9.2 shuttle bass head that has stopped working
I recently had a power surge and had to replace the fuse to power supply
After doing this .....when I turn my amp on the lights flash is a sequence 2 short flash 1 long

What have I missed
 
The fuse is not a user replacement part, if it opens there is a major fault with the power supply and must be replaced (along with anything else that might have been damaged). These amps are not end user repairable, there are specific tests that must be done for safety certification.

There is a flat rate service program that covers all Shuttle amps, the labor is $85 flat plus $199 for the power module. This assumes that you did no additional damage by replacing the fuse. units with failed repair attempts are generally excluded from the flat rate service program. The service also goes through the whole amp to repair any other problems and perform any necessary factory updates.

PM me if you would like information on the program.
 
Hi all
I have a genz benz 9.2 shuttle bass head that has stopped working
I recently had a power surge and had to replace the fuse to power supply
After doing this .....when I turn my amp on the lights flash is a sequence 2 short flas
Hi all
I have a genz benz 9.2 shuttle bass head that has stopped working
I recently had a power surge and had to replace the fuse to power supply
After doing this .....when I turn my amp on the lights flash is a sequence 2 short flash 1 long

What have I missed
Hi Matt,
I've utilized the flat-rate service in the past w/ Aged Horse and highly recommend. Actually have 2 amps with him as we speak (Shuttle 9.0 and 9.2)..

Best,
Chuck Brooks