Genz-Benz Shuttle Megathread: Part II

[Michael Vee]

I will post a pic of my Shuttle 9.2/12T/12T stack this week.

 

[jazzenfunk]

Found a used 6.0 210t combo for a good price at local music store. Previous poster mentioned a gain pot that was scratchy when playing a note and turning the knob.
Quiet when not getting a signal. That's exactly what's happening with it when I tried it. Is this an easy fix? I'd grab it and get it serviced if so.

 

[agedhorse]

Found a used 6.0 210t combo for a good price at local music store. Previous poster mentioned a gain pot that was scratchy when playing a note and turning the knob.
Quiet when not getting a signal. That's exactly what's happening with it when I tried it. Is this an easy fix? I'd grab it and get it serviced if so.

That's covered under the factory flat rate service program, along with whatever else may be needed (including any necessary factory updates). Message me if you would like info on this program. The seller can send it directly to me and I will address the issues and then warranty the amp for 90 days. This is not an uncommon way to get a used purchase serviced.

 

[Jhalb]

Combo, Combo, Combo. Life is good!

 

[Jhalb]

Needed a solution to my problem with the short feet on my Shutte. When I take it out of the cradle the feet don't clear the handle on my stl 112t cab. Didn't want to install taller feet that won't fit back in my combo cradle. Went to HomeDepot and bought 1 inch magnets, 1 inch black washers and 1 inch furniture felt pads. Attached the washer with 3M double stick adhesive strips. Now I just place and remove for either use. I did add the center piece to keep the magnet from slipping from the washer.

 

[Relsom]

Needed a solution to my problem with the short feet on my Shutte. When I take it out of the cradle the feet don't clear the handle on my stl 112t cab. Didn't want to install taller feet that won't fit back in my combo cradle. Went to HomeDepot and bought 1 inch magnets, 1 inch black washers and 1 inch furniture felt pads. Attached the washer with 3M double stick adhesive strips. Now I just place and remove for either use. I did add the center piece to keep the magnet from slipping from the washer.

I went this route ....created a saddle straddle out of a milk crate that allows to support any head over top of the existing saddle or cab with a top mounted handle.

 

[Jhalb]

Found 1 inch neoprene rubber disk to replace the felt pads for a better grip.

 

[Thumpin6string]

Not sure if anyone is still looking at this mega thread. Just got a Shuttle 6.2 today. Sounds incredible with my Epifani UL112. Looking forward to trying it with my UL210 and then with the UL210/UL112 stack. I am looking for the bag and foot switch for it. Any fellow Shuttlers out there have either or both that they would be willing to part with?? Let me know via PM.

 

[rapidfirerob]

Not sure if anyone is still looking at this mega thread. Just got a Shuttle 6.2 today. Sounds incredible with my Epifani UL112. Looking forward to trying it with my UL210 and then with the UL210/UL112 stack. I am looking for the bag and foot switch for it. Any fellow Shuttlers out there have either or both that they would be willing to part with?? Let me know via PM.

I use my Shuttle 6.2 with my Barefaced One10T and One10 cabs. Sounds incredible, of course. Congratulations on the score! Great amp.

 

[shoot-r]

Gigged my GB 9.0 with a SansAmp BDDI V2 in front of the head through a Avatar B210 Neo cab with FOH support in a overly loud country/rock group the other night.

Really like this combination!