Just received new AX100 and GK3B. Axon powers up but the GK3B power light doesn't light up, so I can't produce any sounds yet. Any clues?
Peter Sharp
Ballarat Australia
Peter Sharp
Ballarat Australia
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
GK3B doesn't get power from AXON AX100
- Thread starter pwsharp
- Start date
the pinout is here:
http://johnp.net/projects/guitar-synth/roland-pinouts.html#13pin
Use a multimeter to see if power comes out of the Axon, if it makes it through your cable or if your GK is dead.
Best of :Luck,
S
http://johnp.net/projects/guitar-synth/roland-pinouts.html#13pin
Use a multimeter to see if power comes out of the Axon, if it makes it through your cable or if your GK is dead.
Best of :Luck,
S
Thanks. There's definitely voltage (7V) coming through the cable, so it seems the GK3B may be DOA :-(
Peter
Peter
Good news: After some 13-pin cable jiggling I managed to get the GK's power LED to light up! Actually, it only seems to properly connect up until about 1/2 way in & thereafter, nothing. So at least I'm now able to trigger notes in the Axon 
Initially I've just got it setup in Common mode (no string/fret/pick splits) with the midi out driving patches in the XV-2020, all much more reliably (and polyphonically, of course) than the Sonuus B2M I've been using 'til now.
Meanwhile, I've contacted local music stores to find out if anyone knows of anyone locally who's doing midi guitar or bass. I've been given a single contact and am awaiting a callback to a voice message. The idea is to organise a simple A-B test of cables and GK (or equivalent) pickups & thereby determine whether it's my 13-pin cable or the GK input socket that is faulty. I'll then take appropriate action to replace or repair as needed.
Peter
Ballarat Australia
Initially I've just got it setup in Common mode (no string/fret/pick splits) with the midi out driving patches in the XV-2020, all much more reliably (and polyphonically, of course) than the Sonuus B2M I've been using 'til now.
Meanwhile, I've contacted local music stores to find out if anyone knows of anyone locally who's doing midi guitar or bass. I've been given a single contact and am awaiting a callback to a voice message. The idea is to organise a simple A-B test of cables and GK (or equivalent) pickups & thereby determine whether it's my 13-pin cable or the GK input socket that is faulty. I'll then take appropriate action to replace or repair as needed.
Peter
Ballarat Australia
Before that , try contact cleaner in the Axon and in your pickup.
http://www.talkbass.com/forum/showthread.php?t=514232&page=8
http://www.talkbass.com/forum/showthread.php?t=514232&page=8
Thanks for the contact cleaner tip - certainly makes sense given the behaviour! Seems they have some at the local Dick Smith. I'll pick some up this weekend & report the results.
Peter
Peter
