• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Help dead fret!!!?

O

olibass123

May 11, 2009
17
0
#1
Hey,

So my new Fender 50s classic series bass came through today!
I love it!

Only thing is, on the E string on the 10th fret, its completely dead?
I get the most awful fret buzz off it, and cant seem to get rid of it.
I mucked around with the action - which didnt work.

I am planning on changing the strings, but does anyone know why im getting fret buzz JUST off of the 10th fret E string.

Thanks
 
#4
Best taken to a shop. You can demonstrate the high fret to yourself by laying a level surface (like the edge of a credit card) across three frets and moving it up and down the fretboard. When you have a high fret in the center, the edge will rock to either side.

Fret leveling also requires re-crowning the fret, which requires some expertise; it's not expensive to have a couple of frets done.
 
#5
Assuming that the bass is brand new, I would recommend that you take it back to the store/contact the manufacturer for a warranty repair/replacement. A brand new instrument shouldn't have fret issues like that. I wouldn't tackle the problem yourself unless you know exactly what you are doing; you could make it worse and/or void your warranty on the neck.

Congrats on the new bass though!
 
#6
Brand new stuff from big factories almost always need some level of fret work. You most likely have a high or low fret - which you can check with a fret rocker (like a credit card). Another common thing could be that you have a bent string - I've seen instruments come in to the shop, buzzing severely only on one note, and discovered not a high fret, but a kinked string right on that note.

Fixing a single high or low fret isn't a big deal, but take it to a competent tech.
 
#7
Pilgrim said:
Best taken to a shop. You can demonstrate the high fret to yourself by laying a level surface (like the edge of a credit card) across three frets and moving it up and down the fretboard. When you have a high fret in the center, the edge will rock to either side.

Fret leveling also requires re-crowning the fret, which requires some expertise; it's not expensive to have a couple of frets done.
Click to expand...

There's a lowball tech in the bay area, that offers, "no-frills" fretmills, w/o recrowning. He claims that recrowning frets is, "cosmetic".
 
#9
JLS said:
There's a lowball tech in the bay area, that offers, "no-frills" fretmills, w/o recrowning. He claims that recrowning frets is, "cosmetic".
Click to expand...

I've seen those Craigslist ads... simply baffling that anybody could be that clueless. I really, really hope that he's not duping people out of their hard earned money for his "work".
 
#11
My suggestion is to take it to a reputable repair shop and let them do a fret level and dress. It won't break the bank and your new bass will play much better.
like mongo said, A high fret can simply be an improperly seated fret. I have had them on expensive basses. It happens. no big deal.
I usually have Ken Nash, www.theguitarmechanic.com who does my work, check all my frets on a new bass and if needed re seat them and glue them in as well as a level and dress.
 

Latest posts

Top Bottom
Back