• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Help! I’m new!

It looks like the shielding of the blue cable has come detached from somewhere down by the 'bass cut' pot on your bass, regardless of what problems OP might be facing!

Are these basses entirely passive, but with bass and treble cut controls? That is cool! The bass cut is efficiently executed as well.
I haven’t played this bass in awhile, but there were no issues last time I used it. This bass just sits my garage now. There’s been no turning back since I’ve gone Fender.
 
I have a passive vvtt bass. I knew this going in, but just confirming, tone 1 doesn’t end to get into tone 2’s business. Sometimes I solo one or the other, and that works, but I had a 4 hole bass. - also in interest of full disclosure, the pickups are 4-wire and designed to operate as series, single coil, parallel independent of one another. So, sounds like you as on the right track. Good luck!
 
Soooooooooooooo it seems Spidey is good at using .........




Wait for it.





Almost.....






........ the web.






Welcome to TalkBass @rodzilla74 !!!!! Looks like you got what you need.

images(5).jpg


Good morning, @two fingers!
 
Try this... I emailed them, asking for a wiring diagram for a Tobias IV Standard...
Try this... I emailed them, asking for a wiring diagram for a Tobias IV Standard...
Thanks Spidey this diagram is the first I’ve seen that is spot on to what I have. The only thing is the orange wire I have coming from the bass cut it doesn’t show up on any diagram I’ve seen. But that brings me down to one wire to figure out which I should get eventually. I emailed them as well but guess I didn’t ask politely enough. Thanks again for the great info.
 
  • Like
Reactions: Spidey2112
I'm having a problem understanding this... I'm not seeing the wires you describe as being 'ripped off'.

"... when he turn it up..."... turned what up?
The volume pot was not tightened down to the body so when he turned the volume knob it did a full rotation wrapping the wires and pulling from their solder joints. Not sure why it was loose but its something I’ll keep an eye from now on.
 
I’m guessing by your reply that doesn’t mean it’s stock?

I’m pretty sure he is referring to the special kind of ridicule and derision that Guitar Center usually receives from TalkBass members. Ignore it if/when it happens.
 
  • Like
Reactions: Spidey2112