TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Is it necessary to get a shorter string for this purpose? Or can a longer string be cut to the correct length without any problems?
That's what I thought, but I wanted to make sure. Thanks!High C strings are single-wrap (no taper at the tuner end), so it really wouldn't matter how short you cut them.
Good to know. The bass I would do this on isn't out yet, so I don't know any specific measurements yet. It's the MTD Kingston LK5.Given the scale length and location of the tuner, you might get away with using a regulate .032-.026 guitar string. Just feed a bass ball end through the string so it’ll sit in the bridge and you should be good.
There are several string brands that sell individual high C singles. They are long scale but are fine for any scale bass, you can wrap as much of the string around the post as you want, as they are pretty small gauge (~.030-ish). I do that on a short scale bass. You can cut off excess if you want, just as usual try to leave at least 3 wraps around the tuner post.High C strings are single-wrap (no taper at the tuner end), so it really wouldn't matter how short you cut them.
Good to know. The bass I would do this on isn't out yet, so I don't know any specific measurements yet. It's the MTD Kingston LK5.
View attachment 4777006