i came up with 1080.7078
(radius squared) x pi right?
Wow if you are going to be picky about a few hundredths of an inch then I should let you know the number is 1080.707873 and if you wish to round it it would be 1080.7079
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
i came up with 1080.7078
(radius squared) x pi right?


Any reason why you didn't get rid of the agro as well and got the dual channel AG500?
Just seems that it would at least save space since the agro is the same as the distortion channel.

There's actually a very good reason but it's a secret that only a few people know and I don't think the world is ready for it yet.
Hint: has something to do with WHERE the saturation is in the signal path![]()
Man, all you guys are off with your speaker area calculations. You need to calculate the cone area, rather than just a flat circular plane.
This is six 15's and six 10's. I've since upgraded to a 6-12 cab under the 6-10 and the same 4-15. I use three amps now as well. I'm 5'-10" tall and it stands 8 " over my head. I can DROWN out two full Marshall stack with this no joke. ( old marshalls too... not that new wimpy crap they're selling these days!) This is my medium stage rig. My huge rig is still yet to come.
I've posted this a few times before, but sure, why not.
An old rig of mine:
Link Removed
Link Removed
Link Removed
PLX-3402 - Stereo mode with one Avatar B410 per channel, each receiving 1100 watts.PLX-2402 - Bridged mono mode, providing 1200 watts to each Aguilar GS-212.
PLX-3402 - 2200 wattsPLX-2402 - 2400 wattsTotal wattage = 4600
beautiful. you posted on the acoustic forums, did you not?
i used to run my setup with two acoustic 220s, but needed a little more power.
Wow if you are going to be picky about a few hundredths of an inch then I should let you know the number is 1080.707873 and if you wish to round it it would be 1080.7079
I know that you sold part of this rig but curiosity has me asking, "How tall are you, mate?"
M. M.
![]()
This is my 78 SVT head with two 810's. The right one is from 78 and the left one from 73. Protected by my 83 sunburst Fender P bass, my 77 Fender Telecaster bass and my old Squier P bass.
For even a more evil big rig I could have added my 73 SVT head, and my 73 V4 head. Would make a nice pic, but I never have it all in one house at the same time. So taking a pic is a bit of a problem.
I know it is in my bedroom, but I am no bedroom hero. It was just the place with the most room cause I live fairly small. Normally I have them standing on either side of the bed, without the head on top. Makes nice bed stands!
![]()
Yea... I'm one of the resident weasels on that forum. I've never used a 220 but I've got a 320 and a 330 and lemme tell you... all these guys posting pics of their SVT's and saying that they are "loud" just tells me that they have yet to plug into one of these things. I've got a couple of 370's as well ( a few 470's and a 450 too.. oh and a 150 and a 140 also...) and a full 360 double cab ( john paul jones!) set up on the way. I've actually got not one but two of the 6-12 cabs and two of the 6-10 cabs. I'm working towards getting a gig where I can actually put together the mother of all rigs; two 18 horns, the 4-15, two 6-12's, two 6-10's and a couple of secret weapon cabs I'm still in the planning/design stage of.
I listened to your myspace stuff (cowards). very nice. You guys have two 220's!
thank you! i no longer use two 220's, but i still hold them in very high esteem and would love to own one (if not two) again. those recordings were done with a 220, however.