Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Kaossilator help!
- Thread starter dudi8
- Start date
Connecting a headphone or line signal directly to your cab will not make any noise.
If your amp has a line in, connect the line out (the RCAs) to the amp's line in. This would require either a single RCA to 1/4" TS cable, or two, if your amp has stereo line in.
If no line in, you may able to get away with running the line in of the Kaossilator to the instrument input, although you may have issues with clipping.
If your amp has a line in, connect the line out (the RCAs) to the amp's line in. This would require either a single RCA to 1/4" TS cable, or two, if your amp has stereo line in.
If no line in, you may able to get away with running the line in of the Kaossilator to the instrument input, although you may have issues with clipping.
