Loose Stereo Input Jack :(

[TLW]

I have a TR series Ibanez bass guitar. (notoriously known for their loose stereo input jack. ((correct terminology?))

Whenever the cord moves sometimes it sends a crackle or pop to the amp.

Is there anyway to fix this problem?

If not, can i replace the stereo input jack with a new one?


I would greatly appreciate some feedback

 

[silen7ce]

Im not sure about that exact bass but you can just pop open the cavity and tighten up the nut on the jack (provided it works like the basses I've had this problem with)

 

[TLW]

Thanks for your reply.

I have popped the back open and its not the input jack that moves itself, its actually the cord head moving inside the input jack.

I'm not sure if im completely understanding what youre saying, but from what i've interpreted, you mean tightening the nut that holds the input jack in place.

Sorry for not clarifying.

 

[silen7ce]

ooh I think I understand what you mean now sorry at first I thought you meant the jack itself was loose and moving around. If its the jack not being tight enough the only solution I know of is a new jack. I could be misunderstanding you though.

 

[TLW]

So I can replace the jack?

This would take some soldering from what I can see?

 

[silen7ce]

yeah its pretty straight forward though just connect the wires to the new jack as they are connected now. Very little skill involved You can probably pick the jack up from radio shack or a local do it yourself electronics place.

 

[TLW]

Well thanks man.

Does anybody have any suggestions regarding the best place to get this input jack for my Bass?

Are there different kinds?

I need to be educated.

 

[Pilgrim]

The better quality jacks are made by Switchcraft. Just do an internet search for "Switchcraft 1/4 jack" and you'll find them at various places. You might also just bend back the part of the existing jack that's not making contact.

 

[TLW]

Right on man, I can see what youre saying but im afraid it will mess it up and i wouldn't have a jack.

Then I'd be soundless for a while

 

[202dy]

Right on man, I can see what youre saying but im afraid it will mess it up and i wouldn't have a jack.

Then I'd be soundless for a while

Then take it to a pro. It is not an expensive repair. It is also a good way to begin a relationship with a skilled tech.

BTW, it is an output jack.

 

[GeoffByrne]

Buy another cable.

 

[Boogie B]

I have the same problem. Do I buy a stereo jack input or a mono-one. Seeing as there are 3 connection (1 batt + 2 volume) i'm guessing stereo.
I need this info quite urgently :s

 

[i_got_a_mohawk]

I have the same problem. Do I buy a stereo jack input or a mono-one. Seeing as there are 3 connection (1 batt + 2 volume) i'm guessing stereo.
I need this info quite urgently :s

For an active bass you need a stereo jack.



To the OP, is it just the tip that isnt connecting properly? You could always just bend the contact that connects to the tip of the plug a bit.