• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Double Bass Lowering acoustic sound level

M

MIB

Jun 16, 2005
9
0
51
Switzerland
#1
Hi folks

I'm quite new in the business of DB, but have the first problem. Playing at home is more or less impossible, because the bass is just too loud. So my idea is - and I would like to hear some opinions of you - to just keep the sound away from the body. How to do? I think about placing a thin (maybe 1 cm) piece of rubber (or something else: I have to try) between the bridge and the body. This piece should work as a damper for the waves coming through the bridge. I haven't tried it yet, but I hope it works for home playing. For concerts, I will not change the setup, because I think that the sound taking by the picks should not change dramatically with the rubber in place (at least not for D&B und Triphop). Ah, and the string height is than just adjusted with the adjusters (sounds logic :D ).

So, I'm know eager to hear your opinions :hyper:

Have a nice weekend

PS: Hope you understand my english :hiding:
PS: I'm wondering, if the bridge is still stable afterwords....
 
#2
MIB said:
Hi folks

I'm quite new in the business of DB, but have the first problem. Playing at home is more or less impossible, because the bass is just too loud. So my idea is - and I would like to hear some opinions of you - to just keep the sound away from the body. How to do? I think about placing a thin (maybe 1 cm) piece of rubber (or something else: I have to try) between the bridge and the body. This piece should work as a damper for the waves coming through the bridge. I haven't tried it yet, but I hope it works for home playing. For concerts, I will not change the setup, because I think that the sound taking by the picks should not change dramatically with the rubber in place (at least not for D&B und Triphop). Ah, and the string height is than just adjusted with the adjusters (sounds logic :D ).

So, I'm know eager to hear your opinions :hyper:

Have a nice weekend

PS: Hope you understand my english :hiding:
PS: I'm wondering, if the bridge is still stable afterwords....
Click to expand...
Don't mess with the bridge! Get a mute.
 
#4
Are you playing arco--with the bow--or just plucking?

If you're using the bow, you can get a rubber mute that fits over the bridge and dampens vibration--it cuts the bowing volume a lot

I suppose you could cover the sound holes, or maybe try tying a band of cloth across the body
 
#5
Mostly I'm picking, but I have to practice the arc :cool:
I just tried to put some rubber pieces between the adjusters, but the sound is exactly as loud as before. I had the idea with the holes myself but never tried it out. Does it work?
 
#7
I use a rubber mute regularly but it never dampens enough. My ultimate solution is to buy one of the NS Design EUBs and get the shoulder strap kit so the bass is completely suspended: no vibrations through the floor and no big body cavity to worry about. Just dont' have the $$$ for it yet.

My current solution is to have practice studio space. :hmm:
 
#10
Have you tried a different room in your house? Some rooms are just louder. On a side note, and this may sound like a stupid question, but have you tried adjusting your own dynamics? That is, have you you tried playing softer? Good luck on your quest.
-Phil
 
#11
Thanx for all your suggestions.
The house I'm living in (with several flats), has extremely thin walls, so everything can be hear everywhere (although the rooms are differently loud). I could play softer, but that has a too big impact in my play techniques (if you always play softer, you will not be able or at least it will be difficult to play different at a concert). I'm currently looking around for a room outside, but that sucks, cause I can't play than when I want :bawl:

Whats next:
I will try to mute the sound with a sleeping bag... or maybe I will construct an active sound reducing system (there is an idea :ninja: )
 
#14
@D McCartney
An EUB would in principle be an option. But I can't afford a second bass and I like the body of the DB on my own body during playing. I miss the feeling of that on a EUB.

@Alex:
That looks not bad, but for that room I just need to build a house first ;) . No, seriously, I'm practicing in my flat because my music room is too far away and I don't want to transport the DB all the time (it's just a bit complicated....)
 
#16
PB+J said:
If you're using the bow, you can get a rubber mute that fits over the bridge and dampens vibration--it cuts the bowing volume a lot

I suppose you could cover the sound holes, or maybe try tying a band of cloth across the body
Click to expand...

Note that there are special practice mutes that are much bigger and heavier than regular performance mutes. You can also stuff towels in the F holes.
 

Latest posts

Top Bottom
Back