• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Mesa M9 needs two rack spaces open above it?

Finally read the manual and was disappointed to see the Mesa Carbine M9 needs two open rack spaces above it. They should have just made the device four spaces tall! Dang I thought I had it sized right, as it fits perfectly front and back in one of my existing two space cases. Don't really want to go bigger. Reckon I might have to pull it from the rack upon arrival. Grrr.
 
Measure carefully and mark where the vents are on the top of the rack. Cut narrow slots in the top of the rack with a jig saw where the vents are and only where the vents are. Make the initial hole for each jig saw run with a drill bit. Start each slot on the opposite side so the drill holes aren't lined up, which would weaken the rack.

Try to get a feel for the air flow inside the unit and how important the top vents are. Then you'll be able to tell how much you're restricting it in the rack and if the slots help enough. Stay away from kids with dimes.
 
Or, you could just follow the advice in the manual, mesa built the thing after all, and be sure your m9 has two rack spaces above it. :D

All kidding aside, I wouldn't take the chance, or ruin a perfectly good two space rack case.