TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
I haven’t tried any other amp/cab combos. My other cab is at my friend’s house where we rehearse and I only have the one amp. It’s 8 ohm if I remember right. I’ll correct that tomorrow if it’s different.
no roommates but my wife made some delicious pea soup two days ago
... So I guess I'M the one who has to do it.....


So happy you figured it out !! I LOVE the 2 o'clock sweet spot for the gain setting. So I can understand. That was some nice detective work you did. LIVE FROM MICHIGAN ... (had to)THis thread is awesome! Y'all are cracking me up! Full disclosure: I've cleared a room myself from time to time
I have a few updates. I had already tested the battery and it checked out so that wasn't it. THen I moved my setup outside because I wanted to rule out any strange room resonances; there was no change--still heard the farting.
I made sure I didn't have the bass cut/boost all the way up. Usually it's somewhere between flat and +50%, but even cut 100% it still was doing it.
The Shuttle has a gain and volume knob in the preamp section, with a Signal O/L LED that glows a pleasing orange when you overdrive the tube. It wasn't coming on. I had gain at about 2 o'clock and the volume at about 10 o'clock.
Well, I dialed the gain way back to 8 o'clock and boosted the volume to about 4 o'clock. The farting WENT AWAY. That was it. Turns out my LED is not working any more. I later dimed the gain and it still stayed off.
Strange though that with gain at 2 o'clock I wasn't getting that overdrive sound on the higher notes but getting significant distortion on the lower notes. Also strange that the Yamaha didn't do it at all till just a tiny bit when the gain was all the way up. And with gain low and volume high, there is a major increase in a hissing sound that I don't recall hearing before.
I just eyeballed the pickup and it's maybe 1/8 inch from pole piece to string, so I may mess around with that as well. Thanks for the laughs and the advice folks!