• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

NBD - And baby makes four.

darwin-bass

Supporting Member
Mar 29, 2013
5,457
9,167
Salem OR
Well, sort of NBD. I've had this short scale sunburst P bass body for a while and it has had a number of necks. I though I was done with it but it is just so light I can't bring myself to sell it.

So instead, I bought yet another neck for it and increased my collection to four instruments. These are all Warmoth.

L to R:
  • G4 Dakota red satin body, wenge / ebony fretless neck, 32" scale, East preamp, TI JF, low 7 lb range.
  • Burgundy mist P body, wenge / rosewood neck, 32" scale, P with TI JF low 7 lb range.
  • Chambered ash sunburst P body, roasted maple / rosewood neck, 32" scale, P with rounds, under 6.7 lbs.
  • G4 body, maple neck, 34" scale, East preamp, rounds, under 8.5 lbs.
nbd-4-01.jpg



Here it is nicely placed in an electric guitar case.

nbd-4-02.jpg


nbd-4-03.jpg


nbd-4-04.jpg
 
Curious minds want to know..... it's me, I'm curious.... how do you feel about the wenge neck versus the roasted maple neck?
Really good question. I put TruOil on the roasted maple neck and it turned out to be sticky. I've since sanded several times to remove the finish from the back of the neck. It is still a bit sticky so I'm not down to bare wood yet.

yet, with both of the wenge necks I've had to sand (400, 600, 1000, 1500) to get them to not raise the grain due to usage.

So as they sit right now, I like the satin lacquer maple 34" neck the best followed by the wenge necks and then the roasted maple (sticky)

BUT once I get that roasted maple neck sanded bare again, I expect it to be the best of them all.
 
Really good question. I put TruOil on the roasted maple neck and it turned out to be sticky. I've since sanded several times to remove the finish from the back of the neck. It is still a bit sticky so I'm not down to bare wood yet.

yet, with both of the wenge necks I've had to sand (400, 600, 1000, 1500) to get them to not raise the grain due to usage.

So as they sit right now, I like the satin lacquer maple 34" neck the best followed by the wenge necks and then the roasted maple (sticky)

BUT once I get that roasted maple neck sanded bare again, I expect it to be the best of them all.

Interesting. I'm in the middle of deciding between raw roasted and raw wenge right now