• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Double Bass Need help identifying this bass

Found this bass when demolishing an old storage building recently. Seems to be well-made in spite of weird design, but has no maker's label in it. Anybody have any ideas?

Thanks,
xwtb
 

Attachments

  • FBFB.gif
    FBFB.gif
    93.2 KB · Views: 400
  • FBPH.gif
    FBPH.gif
    106.5 KB · Views: 299
That may be a hell of a find right there. The scroll screams Pollmann but the body design is not one I remember Pollmann using. Upper and lower busetto corners are rare indeed. The only one's I have seen are Yankee basses from the early to mid 1800s though I doubt what you have there is that old, or even close. Send this to Pollmann and see what they have to say about it. Also send it to Ken Smith forums, Ken will like this with his breakfast....
 
Those tuning machines look kinda junky but I've never seen a junky bass shaped like that with a scroll that nice. Something tells me the machines have been changed to plate style from individuals. Just a hunch. Most likely a fine instrument.
 
Yes, I bought the building and the contents, which appeared just to be old lumber and chairs. I was mainly after the weathered siding, which I took off first, revealing this beast behind a stack of old doors. Neighbor says the property has been unoccupied for at least ten years, was rented before to a guy with a definite German accent. Nothing else know about him.

I'll see about getting more pix (borrowed camera.) Better res would show some roughness in bridge foot area, though I don't feel a lot of wear on the fingerboard. Tuners were definitely not original, cheaper ones screwed down over nicer-looking peghead sides.

--xwtb
 
Ok, somewhere a village is missing me. This is definitely photoshopped. I thought those pictures were funky...the colors on the varnish and fingerboard looked very strange, and on closer inspection the upper Bussetto is a mirror reflection of the lower ones.

I've actually seen lousy, misfit tuner plates installed onto really fine basses before and I assumed that was the case.

Well done, sir.
 
Yup-- look closer and you can see that the bridge, strings, and tailpiece were also edited out. Nice job!