Just picked up a GK GLX 210 and 410 the other day through a trade. I need to get a new head to power both of them. The 410 is rated 400w@8ohms and the 210 is rated 200w@8ohms. Any suggestions? Thanks!!!
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Need new head to power 2 cabs. Suggestions?
- Thread starter BigDaddyBassMan
- Start date
I would look for a head with two output sections. If you run those cabs in parallel off of one output you may run into issues as they are both 8 Ohm cabs. The 210 will get the same amount of power as the 410, so you risk it blowing out.
+1 uneven power distribution between those 2 cabs. To work properly, you's want the 410 to be 4 ohms, and the amp 2 ohm stable. What you've got is not ideal, I'd consider getting rid of the 210, and replacing it with another identical 410. Then, whatever amp you like.
I also have a 115, thrown into the mix. I don't know the exact rating on it, but it was from the backline series if that's of any help. The head I have now is the GK backline 250.
Could consider a gk 800rb. It has the bi amp feature. 100 watts high amp, and 300 watts low amp. Could make for a nice setup.
Jazzdogg
Less barking, more wagging!
If you're looking for a bass head, as opposed to a pre/power set-up, The Carvin BX1500 provides the ability to adjust the output level separately for each cab.
Hopefully, others will recommend bass heads that'll also let let you adjust the level of each cab individually, and provide enough oomph to drive both of your cabs.
Hopefully, others will recommend bass heads that'll also let let you adjust the level of each cab individually, and provide enough oomph to drive both of your cabs.
