Newb question, calculating ohm load with two outputs

[bigthemat]

Hey all,

Looking to get a new amp head to power some cabs I was given. The cabs are both rated at 4 ohms. The amp in question (traynor small block) has two outputs with a minimum of 4 ohms. Does that mean minimum per outputs, or total for both. If I'm doing the math correctly, if it's 4 ohms for both outputs combined, then it would be a 2ohm load and that is bad.

 

[IBJammin]

4 ohm minimum is for the whole load, both output jacks combined.
Correct, two 4 ohm cabs would be 2 ohms combined.
And, also correct, this would be bad for your amp.

 

[abarson]

Manual-Owners-SMALLBLOCK500H-00-1v2.pdf (traynoramps.com)