• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Painted Dots

Stenciling would be the easiest. It could be as simple as using a common paper punch on a piece of good masking tape. Apply to the fingerboard where needed. Mask off the rest of the board and shoot it with an appropriate material.

If the bass has no dots, why not take it to a pro and have them inlay black plastic dots?
 
Here's a site whose stuff you might be interested in, but the site is screwy at present (at least for me):
http://www.fretware.com/home.htm
The graphics aren't showing up on the site, but it does sound interesting. I'll check back later. Thanks.

Edit: I checked their FAQ and found this.....

Q. I have a maple fingerboard with a finish. Can I use your products?
A. Our products are not intended for, nor have they been tested on finished wood products. Typically, fingerboards are unfinished and this is not a problem. Due to the wide variety of finishes that are used on some maple fingerboards, we can't guarantee the product to function at its best when used on them. But it should be noted that our products have an advantage over traditional inlay when it comes to installing on light-wood finishes. You generally do not see traditional inlay work done on light woods because it's harder to match the shade of wood with filler once the shell has been inlayed.