Pedal board cabling help

[rogersjoe]

I am finally (for now) building my pedalboard. But now I have to attach all the pedals. I need to make my own cables do to the crazy routing I need to do. I'm a joke with a solder gun, any suggestion on the solder less cables? I have to do some straight angle and some 90° angles. Any help would be great.

 

[squirefan]

I'm curious about the crazy routing you're talking about.
There's quite a variety of different lengths of patch cables available, not to mention the 'pedal cranks' which are a solid connector between pedals.

 

[Bassragerstitch]

The planet waves stuff is great just make sure you cut the cable straight. I think they have a set with both string and right angle ends george l make a soldlesskit as does x2

 

[rogersjoe]

The routing isn't "crazy" i guess. Just need different lengths and angles to make them work. I've seen some of the DIY kits out there and was wondering if they are any good.

 

[mmbongo]

The George L's kits are insanely easy to put together.